D.C. Mun. Regs. tit. 11, r. 11-K1112
The development standards in Subtitle K §§ 1101 and 1102 shall apply to the BF-2 zones except as specifically modified by this section. In the event of a conflict between the provisions of this section and other regulations of this subtitle, the provisions of this section shall prevail.
The development standards for each lot in the BF-2 zone shall be as set forth in the following table:
TABLE K § 1112.2: BF-2 DEVELOPMENT STANDARDS
BF-2 Zones | Minimum Lot Width (ft.) | Height (ft.) | Maximum Stories | Maximum Lot Occupancy | Minimum Rear Yard |
BF-2A BF-2B | Single Dwelling Unit - 16; All others -N/A | 40 | N/A | 80% | 4 inches per foot of building height; 15 ft. minimum |
BF-2C | N/A | 40 | N/A | 20% | 4 in / 1 ft. (15 ft. min) |
BF-2D | N/A | 40 | 3 | The greater of 40% or the lot occupancy as of the date of adoption of this chapter | The lesser of 4 inches per foot of building height; 15 ft. minimum or the rear yard as of the date of adoption of this chapter |
In the BF-2 zone, rear yards shall be measured as follows:
A detached building with a single dwelling unit shall have two (2) side yards, each a minimum of five feet (5 ft.) in width.
A semi-detached building with a single dwelling unit shall have one (1) side yard, a minimum of five feet (5 ft.) in width.
A building or structure other than a detached or semi-detached building with a single dwelling unit is not required to provide a side yard; however, if a side yard is provided, it shall be no less than four feet (4 ft.).
D.C. Mun. Regs. tit. 11, r. 11-K1112