7 Del. Admin. Code § 1112-7.0

Current through Register Vol. 28, No. 1, July 1, 2024

Section 1112-7.0 - Compliance Certification, Recordkeeping, and Reporting Requirements

7.1 The owner or operator of any major NO_x emitting source or sources shall submit to the Department an initial compliance certification not later than January 15, 1994.

7.1.1 The initial compliance certification shall, at a minimum, include the following information:

7.1.1.1 The name and the location of the facility;

7.1.1.2 The address and telephone number of the person responsible for the facility;

7.1.1.3 Identification of the subject source or sources.

7.1.2 For each subject source or sources, the initial compliance certification shall also provide, at a minimum:

7.1.2.1 The applicable standard;

7.1.2.2 The method of compliance;

7.1.2.3 Estimated emissions without controls;

7.1.2.4 The control system in use;

7.1.2.5 Estimated emission after control;

7.1.2.6 Certification that each subject source is in compliance with the applicable standard or has:

7.1.2.6.1 a RACT plan approved by the Department, or

7.1.2.6.2 a notice of timely RACT plan submittal which is deemed complete by the Department but is still in the approval process.

7.2 Each owner or operator of a source subject to this regulation shall maintain all records necessary for determining compliance with the standards at the facility for a period of five years.

7.3 Reporting requirements

The owner or operator of any source subject to 7.0 of this regulation shall, for each occurrence of excess emissions, within 30 calendar days of becoming aware of such occurrence, supply the Department with the following information:

7.3.1 The name and location of the facility;

7.3.2 The subject source or sources that caused the excess emissions;

7.3.3 The time and date of first observation of the excess emissions;

7.3.4 The cause and expected duration of the excess emissions;

7.3.5 For sources subject to numerical emission limitations, the estimated rate of emissions (expressed in the units of the applicable emission limitation) and the operating data and calculations used in determining the magnitude of the excess emissions;

7.3.6 The proposed corrective actions and schedule to correct the conditions causing the excess emissions.

7.4 Compliance Requirements

7.4.1 Where applicable, compliance with the approved RACT standard shall be based on CEM data collected in accordance with the requirements of 3.1.2 (Performance Specification 2) of 7 DE Admin. Code 1117, and in compliance with the requirements of 40 CFR, Part 60, Appendix F.

7.4.2 If the source is stack tested, EPA test method 7, 7E, or any other appropriate test method which has been approved in advance by the Department and EPA shall be used. The results of the tests shall be submitted to the Department within 45 days after completing the test.

7 Del. Admin. Code § 1112-7.0

12 DE Reg. 347 (09/01/08)