2 Del. Admin. Code § 8C.08

Current through Register Vol. 28, No. 5, November 1, 2024

Section 8C.08 - Rail Traffic Detection

Standard:

01 The devices employed in active traffic control systems shall be actuated by some form of rail traffic detection.

02 Rail traffic detection circuits, insofar as practical, shall be designed on the fail-safe principle.

03 Flashing-light signals shall operate for at least 20 seconds before the arrival of any rail traffic, except as provided in Paragraph 4.

Option:

04 On tracks where all rail traffic operates at less than 20 mph and where road users are directed by an authorized person on the ground to not enter the crossing at all times that approaching rail traffic is about to occupy the crossing, a shorter signal operating time for the flashing-light signals may be used.

05 Additional warning time may be provided when determined by an engineering study.

Guidance:

06 Where the speeds of different rail traffic on a given track vary considerably under normal operation, special devices or circuits should be installed to provide reasonably uniform notice in advance of all rail traffic movements over the grade crossing. Special control features should be used to eliminate the effects of station stops and switching operations within approach control circuits to prevent excessive activation of the traffic control devices while rail traffic is stopped on or switching upon the approach track control circuits.

2 Del. Admin. Code § 8C.08