2 Del. Admin. Code § 3B.17

Current through Register Vol. 28, No. 5, November 1, 2024

Section 3B.17 - Do Not Block Intersection Markings

Option:

01 Do Not Block Intersection markings may be used to mark the edges of an intersection area that is in close proximity to a signalized intersection, railroad crossing, or other nearby traffic control that might cause vehicles to stop within the intersection and impede other traffic entering the intersection. If authorized by law, Do Not Block Intersection markings with appropriate signs may also be used at other locations.

Standard:

02 If used, Do Not Block Intersection markings (see Figure 3B-18) shall consist of one of the following alternatives:

A. Wide solid white lines that outline the intersection area that vehicles must not block;

B. Wide solid white lines that outline the intersection area that vehicles must not block and a white word message such as DO NOT BLOCK or KEEP CLEAR;

C. Wide solid white lines that outline the intersection area that vehicles must not block and white cross-hatching within the intersection area; or

D. A white word message, such as DO NOT BLOCK or KEEP CLEAR, within the intersection area that vehicles must not block.

03 Do Not Block Intersection markings shall be accompanied by one or more Do Not Block Intersection (DRIVEWAY) (CROSSING) (R10-7) signs (see Section 2B.53), one or more Do Not Stop On Tracks (R8-8) signs (see Section 8B.09), or one or more similar signs.

Click here to view Image

Guidance:

03A (DE Revision) If approved by DelDOT Traffic for used along state-maintained roadways, Do Not Block Intersection markings should be as described in option D of Paragraph 2 and Figure 3B-18.

2 Del. Admin. Code § 3B.17