Statutes, codes, and regulations
Delaware Administrative Code
Title 2 - TransportationDepartment of TransportationDivision of Transportation SolutionsManual on Uniform Traffic Control Devices (MUTCD)Part 2 - Signs
Chapter 2D - GUIDE SIGNS-CONVENTIONAL ROADS
Section 2D.54 - Crossover Signs (D13-1 and D13-2)

2 Del. Admin. Code § 2D.54

Download
PDF
Current through Register Vol. 28, No. 5, November 1, 2024
Section 2D.54 - Crossover Signs (D13-1 and D13-2)

Option:

01 Crossover signs may be installed on divided highways to identify median openings not otherwise identified by warning or other guide signs.

Standard:

02 A CROSSOVER (D13-1) sign (see Figure 2D-21) shall not be used to identify a median opening that is permitted to be used only by official or authorized vehicles. If used, the sign shall be a horizontal rectangle of appropriate size to carry the word CROSSOVER and a horizontal directional arrow. The CROSSOVER sign shall have a white legend and border on a green background.

Guidance:

03 If used, the CROSSOVER sign should be installed immediately beyond the median opening, either on the right-hand side of the roadway or in the median.

Option:

04 The Advance Crossover (D13-2) sign (see Figure 2D-21) may be installed in advance of the CROSSOVER sign to provide advance notice of the crossover.

Standard:

05 If used, the Advance Crossover sign shall be a horizontal rectangle of appropriate size to carry the word CROSSOVER and the distance to the median opening. The sign shall have white legend and border on a green background.

Guidance:

06 The distance displayed on the Advance Crossover sign should be 1 MILE, 1/2 MILE, or 1/4 MILE, unless unusual conditions require some other distance. If used, the sign should be installed either on the right-hand side of the roadway or in the median at approximately the distance displayed on the sign.

2 Del. Admin. Code § 2D.54