2 Del. Admin. Code § 2D.28

Current through Register Vol. 28, No. 5, November 1, 2024

Section 2D.28 - Directional Arrow Auxiliary Signs (M6 Series)

Standard:

01 If used, the Directional Arrow auxiliary sign (see Figure 2D-5) shall be mounted below the route sign and any other auxiliary signs in Directional assemblies (see Section 2D.32), and displays a single- or double-headed arrow pointing in the general direction that the route follows.

02 A Directional Arrow auxiliary sign that displays a double-headed arrow shall not be mounted in any Directional assembly in advance of or at a circular intersection.

Option:

03 The downward pointing diagonal arrow auxiliary (M6-2a) sign may be used in a Directional assembly at the far corner of an intersection to indicate the immediate entry point to a freeway or expressway entrance ramp (see Section 2D.46).

Standard:

04 The M6-2a sign shall not be used on the approach to or on the near side of an intersection, such as to designate an approach lane.

2 Del. Admin. Code § 2D.28