2 Del. Admin. Code § 2277-3.0

Current through Register Vol. 27, No. 12, June 1, 2024

Section 2277-3.0 - Glass Coating Material on Motor Vehicles

3.1 The following regulations establish standards and specifications for the use of glass coating material and sun screening devices:

3.1.1 Glass coating material placed, displayed, installed, affixed, or applied upon the windshield of a motor vehicle shall not extend below the AS -1 portion of the windshield as provided by FMVSS 205 and FMVSS 128. The material shall not extend more than five (5) inches down from the uppermost part of the windshield on older vehicles where no AS - 1 mark is indicated on the windshield.

3.1.2 The front side wing vents and windows to the immediate right and left of the driver must comply with the requirements of Federal Motor Vehicle Safety Standard 205. Glass coating material (film tint), when used in conjunction with glazing (vehicle glass) material, must provide a light transmission of not less than 70 percent. All specifications in this rule shall be within normal manufacturer's tolerance, i.e., ± 3%.

3.1.3 Rear window or windows may be applied with glass coating material in conjunction with glazing (vehicle glass) if the motor vehicle is equipped with outside mirrors on both left and right hand sides of the vehicle.

3.1.4 Rear window mounted brake lights on 1986 and later vehicles will be clear of any tint material.

3.1.5 The law applies to all motor vehicles which are operated on the roads and highways in this State, regardless of where such vehicles are registered.

2 Del. Admin. Code § 2277-3.0

9 DE Reg. 1988 (06/01/06)