Conn. Agencies Regs. § 29-349-170
Current through October 16, 2024
Wood magazines of this class shall have sides, bottom, and cover constructed of 2 inch thick hardwood boards well braced at corners and protected by being entirely covered with sheet metal of not less than No. 20 gauge. All nails exposed to interior of the magazine shall be well countersunk. All metal magazines of this class shall have sides, bottom, and cover constructed of sheet metal, and shall be lined with 3/8 inch plywood or the equivalent, including nonferrous metal. Edges of metal covers shall overlap sides at least one inch.
Conn. Agencies Regs. § 29-349-170