Conn. Agencies Regs. § 29-357-19a.4
Current through June 15, 2024
Each door is to be equipped with two (2) padlocks fastened in separate hasps. Padlocks must have at least five tumblers and a case hardened shackle of at least 3/8" diameter. Padlocks must be protected with not less than 1/4 inch steel hoods constructed so as to prevent sawing or lever action on the locks or hasps.
These requirements do not apply to magazine doors that are adequately secured on the inside by means of a bolt, lock or bar that cannot be actuated from the outside.
Conn. Agencies Regs. § 29-357-19a.4