Conn. Agencies Regs. § 20-300b-14

Current through October 16, 2024

Section 20-300b-14 - Acceptable monuments and markers

The following shall be acceptable forms of Monuments and Markers:

(1) disks or plugs, made of durable material set in ledge or concrete and marked with a hole or cross;

(2) monuments 4" (10cm) square by 30" (.75m) long (minimum) of stone or reinforced concrete and marked with a hole or a cross. Some ferrous material shall be placed adjacent to the stone monuments as an aid to recovery;

(3) drill holes 3/8" (10mm) diameter by 1/2" (13mm) deep (minimum) or cross cuts 3/8" (10mm) deep (minimum) in ledge, concrete or the base stones of walls;

(4) metal rods 1/2" (13mm) O.D. (minimum) or metal pipes 1/2" (13mm) I.D. (minimum) or bar stock of equivalent cross sectional area, having sufficient length to be deemed permanent;

(5) nails and spikes that are sufficient in size and are set in pavement in a manner so as to be deemed permanent;

(6) foundation corners; and

(7) other materials or objects deemed permanent by the surveyor.

Conn. Agencies Regs. § 20-300b-14

Adopted effective June 21, 1996