Statutes, codes, and regulations
Colorado Administrative Code
Department 1000 - Department of AgricultureDivision 1007 - Plant Industry DivisionRule 6 CCR 1007-1 - RULES AND REGULATIONS PERTAINING TO THE ADMINISTRATION AND ENFORCEMENT OF THE PESTICIDE APPLICATORS' ACTPart 16 - RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING AND SUBSURFACE TRACER STUDIES
EQUIPMENT CONTROL
Section 6 CCR 1007-1-16.14 - Inspection and maintenance

6 Colo. Code Regs. § 1007-1-16.14

Download
PDF
Current through Register Vol. 47, No. 11, June 10, 2024
Section 6 CCR 1007-1-16.14 - Inspection and maintenance
16.14.1 Each licensee shall visually check source holders, logging tools, and source handling tools, for defects before each use to ensure that the equipment is in good working condition and that required labeling is present.
16.14.1.1 If defects are found, the equipment must be removed from service until repaired, and a record must be made listing: the date of check, name of inspector, equipment involved, defects found, and repairs made. These records must be retained for 3 years after the defect is found.
16.14.2 Each licensee shall have a program for semiannual visual inspection and routine maintenance of source holders, logging tools, injection tools, source handling tools, storage containers, transport containers, and uranium sinker bars to ensure that the required labeling is legible and that no physical damage is visible.
16.14.2.1 If defects are found, the equipment must be removed from service until repaired, and a record must be made listing: date, equipment involved, inspection and maintenance operations performed, any defects found, and any actions taken to correct the defects. These records must be retained for 3 years after the defect is found.
16.14.3 Removal of a sealed source from a source holder or logging tool, and maintenance on sealed sources or holders in which sealed sources are contained may not be performed by the licensee unless a written procedure developed pursuant to 16.16 has been approved either by the Department, NRC, or an Agreement State to perform this operation.
16.14.4 If a sealed source is stuck in the source holder, the licensee shall not perform any operation, such as drilling, cutting, or chiseling, on the source holder unless the licensee is specifically approved by the NRC, or an Agreement State to perform this operation.
16.14.5 The repair, opening, or modification of any sealed source shall be performed only by persons specifically authorized to do so by the Department, the NRC, or an Agreement State.

6 CCR 1007-1-16.14

Colorado Register, Vol 37, No. 14. July 25, 2014, effective 8/14/2014
38 CR 02, January 25, 2015, effective 2/14/2015
38 CR 05, March 10, 2015, effective 3/30/2015
38 CR 12, June 25, 2015, effective 7/15/2015
38 CR 14, July 25, 2015, effective 8/14/2015
39 CR 02, January 25, 2016, effective 2/14/2016
39 CR 16, August 25, 2016, effective 9/14/2016
39 CR 22, November 25, 2016, effective 12/15/2016
40 CR 11, June 10, 2017, effective 6/30/2017
40 CR 20, October 25, 2017, effective 11/14/2017
42 CR 24, December 25, 2019, effective 1/14/2020
43 CR 14, July 25, 2020, effective 8/14/2020
43 CR 18, September 25, 2020, effective 10/15/2020
44 CR 11, June 10, 2021, effective 7/15/2021
44 CR 14, July 25, 2021, effective 8/14/2021
45 CR 22, November 25, 2022, effective 12/15/2022