801 Mass. Reg. 4.05

Current through Register 1524, June 21, 2024

Section 4.05 - Fee Schedule - Laboratory Testing and Calibration Services

TABLE 1.

(1) The following is the fee schedule for laboratory testing and calibration of weights, measures or instruments submitted to the Standards Laboratory of the Division of Standards as provided for in M.G.L. c. 98, §46.

(a) Weights.
1. Tolerance Testing
Up to and including 2 lbs.	$2.00 each
Over 2 lbs. and including 50 lbs.	2.50 each
Up to and including 1 kilogram	2.00 each
Over 1 kilogram and including 30 Kg.	2.50 each

Tolerance testing reports will not indicate any value of error or direction of error and will only indicate whether the weights do or do not meet the classes of tolerances specified in National Bureau of Standards publications. If a request is made that weights be adjusted to meet the indicated tolerance, an additional charge of $1.00 per weight shall be made on those weights which are readily adjustable.

2. Apparent Mass Calibrations
Up to and including 2 lbs.	$3.00 each
Over 2 lbs. and including 50 lbs.	3.50 each
Up to and including 1 kilogram	3.00 each
Over 1 kilogram and including 30 Kg.	3.50 each

Apparent Mass calibration reports will indicate the apparent mass correction which may be applied in the use of the weight.

3. Volumetric Measures Glass Flasks and Graduates	$10.00 each
Field Test Measures up to and including 5 Gallons	5.00 each
Field Test Measures over 5 Gallons	10.00 each
4. Steel Tapes
50 Feet or less	$10.00 each
Over 50 Feet and including 100 Feet	12.00 each
Over 100 Feet	15.00 each
All other work to be done at the rate of	$15.00 per hour.

801 CMR 4.05