Subsection 2101.3 - Construction documents The construction documents shall show all of the items required by this code including the following:
1. Specified size, grade, type and location of reinforcement, anchors and wall ties.2. Reinforcing bars to be welded and welding procedure.3. Size and location of structural elements.4. Provisions for dimensional changes resulting from elastic deformation, creep, shrinkage, temperature and moisture.5. Loads used in the design of masonry.6. Specified compressive strength of masonry at stated ages or stages of construction for which masonry is designed, except where specifically exempted by this code.7. Details of anchorage of masonry to structural members, frames and other construction, including the type, size and location of connectors.8. Size and location of conduits, pipes and sleeves.9. The minimum level of testing and inspection as defined in Chapter 17, or an itemized testing and inspection program that meets or exceeds the requirements of Chapter 17. 2101.3.1Fireplace drawings. The construction documents shall describe in sufficient detail the location, size and construction of masonry fireplaces. The thickness and characteristics of materials and the clearances from walls, partitions and ceilings shall be indicated.