780 CMR, 1005.3

Current through Register 1533, October 25, 2024

Subsection 1005.3 - Door hardware encroachment

Surface-mounted latch release hardware shall be exempt from inclusion in the 7-inch (178 mm) maximum projection requirement of Section 1005.2 when:

1. The hardware is mounted to the side of the door facing the corridor width when the door is in the open position; and

2. The hardware is mounted not less than 34 inches (865 mm) or more than 48 inches (1220 mm) above the finished floor.

780 CMR, 1005.3