Section 8.06 - Standards for All Other RCRA Facilities(1)Applicability. These standards apply to owners and operators of RCRA facilities except those subject to interim status standards under 314 CMR 8.04 and except those facilities which are wastewater treatment units subject to the standards of 314 CMR 8.05.(2) All owners and operators of RCRA facilities subject to 314 CMR 8.06 shall comply with: (a) The management standards of 310 CMR 30.500: Management Standards for All Hazardous Waste Facilities, including: general waste analysis; security; general inspection; personnel training; contingency plan; emergency procedures, preparedness and prevention; recordkeeping and reporting; general requirements for ignitable, reactive, or incompatible wastes; closure; and, where applicable, post-closure.(b) The technical standards of 310 CMR 30.600: Technical Standards for All Hazardous Waste Facilities, including general requirements for all facilities; preparation of waste for disposal; injection wells, leaching fields, and seepage pits; and, if applicable, the standards for surface impoundments, landfills, waste piles, land treatment, ground water protection, use and management of containers, and storage and treatment in tanks.(c) The location standards of 310 CMR 30.700: Facility Location Standards.(d) The financial responsibility requirements of 310 CMR 30.900: Financial Responsibility Requirements for Treatment, Storage, and Disposal Facilities.(e) In the case of POTWs, the standards for generators in 310 CMR 30.300: Requirements for Generators of Hazardous Wastes and the requirements for incineration in 310 CMR 7.08(4): Hazardous Waste Incinerators, as applicable.(3) Any references to a license shall be interpreted to mean a permit issued under 314 CMR 3.00: Surface Water Discharge Permit Program, 5.00: Groundwater Discharge Permit Program, or 7.00: Sewer System Extension and Connection Permit Program.Adopted by Mass Register Issue 1327, eff. 12/2/2016.