Section 40.1027 - Active Exposure Pathway Mitigation Measure Remote Monitoring Registration(1) Remote monitoring devices required pursuant to 310 CMR 40.1025(3)(d) and 310 CMR 40.1026(3)(d), respectively, must be registered with the Department as specified in 310 CMR 40.1027.(2) A complete remote monitoring registration requires:(a) submission of an initial registration to the Department on a form provided by the Department for such purpose;(b) demonstration that the remote monitoring device is capable of immediately transmitting alerts when the vacuum level (or interior pressure level, if applicable) is outside of the acceptable range and when the vacuum level (or interior pressure level, if applicable) returns to normal via email to the Department in the format specified by the Department and contains, at a minimum, the RTN, device number, event description, date of the event and time of the event;(c) for remote monitoring devices that continuously monitor and continuously transmit key operational data of the Active Exposure Pathway Mitigation Measure to a website that meets Department specifications, the Uniform Resource Locator (URL) for such website and demonstration that the remote monitoring device is capable of transmitting key AEPMM operational data to such website; and(d) receipt of written confirmation from the Department that the registration is complete.Adopted by Mass Register Issue 1503, eff. 3/1/2024.Amended by Mass Register Issue S1516, eff. 3/1/2024.