Subpart G - TRAIN OPERATIONS AT TRACK CLASSES 6 AND HIGHER
- Section 213.301 - Scope of subpart
- Section 213.303 - Responsibility for compliance
- Section 213.305 - Designation of qualified individuals; general qualifications
- Section 213.307 - Classes of track: operating speed limits
- Section 213.309 - Restoration or renewal of track under traffic conditions
- Section 213.311 - Measuring track not under load
- Section 213.313 - Application of requirements to curved track
- Section 213.317 - Waivers
- Section 213.319 - Drainage
- Section 213.321 - Vegetation
- Section 213.323 - Track gage
- Section 213.327 - Track alinement
- Section 213.329 - Curves; elevation and speed limitations
- Section 213.331 - Track surface
- Section 213.332 - Combined track alinement and surface deviations
- Section 213.333 - Automated vehicle-based inspection systems
- Section 213.334 - Ballast; general
- Section 213.335 - Crossties
- Section 213.337 - Defective rails
- Section 213.339 - Inspection of rail in service
- Section 213.341 - Initial inspection of new rail and welds
- Section 213.343 - Continuous welded rail (CWR)
- Section 213.345 - Vehicle/track system qualification
- Section 213.347 - Automotive or railroad crossings at grade
- Section 213.349 - Rail end mismatch
- Section 213.351 - Rail joints
- Section 213.352 - Torch cut rail
- Section 213.353 - Turnouts, crossovers, and lift rail assemblies or other transition devices on moveable bridges
- Section 213.355 - Frog guard rails and guard faces; gage
- Section 213.357 - Derails
- Section 213.359 - Track stiffness
- Section 213.361 - Right of way
- Section 213.365 - Visual track inspections
- Section 213.367 - Special inspections
- Section 213.369 - Inspection records