Subpart F - SPECIFICATION FOR CRYOGENIC LIQUID TANK CAR TANKS AND SEAMLESS STEEL TANKS (CLASSES DOT-113 AND 107A)
- Section 179.400 - General specification applicable to cryogenic liquid tank car tanks
- Section 179.400-1 - General
- Section 179.400-3 - Type
- Section 179.400-4 - Insulation system and performance standard
- Section 179.400-5 - Materials
- Section 179.400-6 - Bursting and buckling pressure
- Section 179.400-7 - Tank heads
- Section 179.400-8 - Thickness of plates
- Section 179.400-9 - Stiffening rings
- Section 179.400-10 - Sump or siphon bowl
- Section 179.400-11 - Welding
- Section 179.400-12 - Postweld heat treatment
- Section 179.400-13 - Support system for inner tank
- Section 179.400-14 - Cleaning of inner tank
- Section 179.400-15 - Radioscopy
- Section 179.400-16 - Access to inner tank
- Section 179.400-17 - Inner tank piping
- Section 179.400-18 - Test of inner tank
- Section 179.400-19 - Valves and gages
- Section 179.400-20 - Pressure relief devices
- Section 179.400-21 - Test of pressure relief valves
- Section 179.400-22 - Protective housings
- Section 179.400-23 - Operating instructions
- Section 179.400-24 - Stamping
- Section 179.400-25 - Stenciling
- Section 179.400-26 - Approval to operate at 286,000 gross rail load (GRL)
- Section 179.401 - Individual specification requirements applicable to inner tanks for cryogenic liquid tank car tanks
- Section 179.401-1 - Individual specification requirements
- Section 179.500-1 - Tanks built under these specifications shall meet the requirements of Section 179.500
- Section 179.500-3 - Type and general requirements
- Section 179.500-4 - Thickness of wall
- Section 179.500-5 - Material
- Section 179.500-6 - Heat treatment
- Section 179.500-7 - Physical tests
- Section 179.500-8 - Openings in tanks
- Section 179.500-10 - Protective housing
- Section 179.500-11 - Loading and unloading valves
- Section 179.500-12 - Pressure relief devices
- Section 179.500-13 - Fixtures
- Section 179.500-14 - Test of tanks
- Section 179.500-15 - Handling of tanks failing in tests
- Section 179.500-16 - Tests of pressure relief devices
- Section 179.500-17 - Marking
- Section 179.500-18 - Inspection and reports
- Section 179.500 - Specification DOT-107A * * * * seamless steel tank car tanks