Section 178.255-14 - Marking(a) In addition to markings required by Section VIII of the ASME Code (IBR, see §171.7 of this subchapter), every tank shall bear permanent marks at least 1/8-inch high stamped into the metal near the center of one of the tank heads or stamped into a plate permanently attached to the tank by means of brazing or welding or other suitable means as follows: Manufacturer's name _______ Serial No.________________________
DOT specification________________________
Nominal capacity _______ (gallons)
Tare weight _______ (pounds)
Date of manufacture________________________
29 FR 18972, 12/29/1964. Redesignated at 32 FR 5606, 4/5/1967, and amended by Amdt. 178-67, 46 FR 49906, 10/8/1981; 68 FR 75750, 12/31/2003