Section 73.611 - Emission levels and mask filter(a) The power level of emissions on frequencies outside the authorized channel of operation must be attenuated no less than the following amounts below the average transmitted power within the authorized channel. In the first 500 kHz from the channel edge the emissions must be attenuated no less than 47 dB. More than 6 MHz from the channel edge, emissions must be attenuated no less than 110 dB. At any frequency between 0.5 and 6 MHz from the channel edge, emissions must be attenuated no less than the value determined by the following formula: Formula 1 to Paragraph (a)
Attenuation in dB = -11.5([DELTA]f + 3.6);
Where:
[DELTA]f = frequency difference in MHz from the edge of the channel.
(b) This attenuation is based on a measurement bandwidth of 500 kHz. Other measurement bandwidths may be used as long as appropriate correction factors are applied. Measurements need not be made any closer to the band edge than one half of the resolution bandwidth of the measuring instrument. Emissions include sidebands, spurious emissions and radio frequency harmonics. Attenuation is to be measured at the output terminals of the transmitter (including any filters that may be employed). In the event of interference caused to any service, greater attenuation may be required. 89 FR 7243 , Feb. 1, 2024 83 FR 5544, 2/8/2018; 89 FR 7243, 3/4/2024