47 C.F.R. § 73.190

Current through May 31, 2024
Section 73.190 - Engineering charts and related formulas
(a) This section consists of the following Figures: 2, r3, 5, 6a, 7, 8, 9, 10, 11, 12, and 13. Additionally, formulas that are directly related to graphs are included.
(b) Formula 1 is used for calculation of 50% skywave field strength values.

Formula 1. Skywave field strength, 50% of the time (at SS + 6):

The skywave field strength, Fc(50), for a characteristic field strength of 100 mV/m at 1 km is given by:

View Image

The slant distance, D, is given by:

View Image

The geomagnetic latitude of the midpoint of the path, [PHI]M, is given by:

[PHI]M = arcsin[sin aM sin 78.5° + cos aM cos 78.5° cos(69 + bM)]degrees (Eq. 3)

The short great-circle path distance, d, is given by:

View Image

Where:

d° = arccos[sin aT sin aR + cos aT cos aR cos(bR - bT)]degrees (Eq.5)

Where:

aT is the geographic latitude of the transmitting terminal (degrees)

aR is the geographic latitude of the receiving terminal (degrees)

bT is the geographic longitude of the transmitting terminal (degrees)

bR is the geographic longitude of the receiving terminal (degrees)

aM is the geographic latitude of the midpoint of the great-circle path (degrees) and is given by:

bM is the geographic longitude of the midpoint of the great-circle path (degrees) and is given by:

View Image

View Image

Note (1): If |FM| is greater than 60 degrees, equation (1) is evaluated for | FM| = 60 degrees.

Note (2): North and east are considered positive; south and west negative.

Note (3): In equation (7), k = -1 for west to east paths (i.e., bR [GREATER THAN]bT), otherwise k = 1.

(c) Formula 2 is used for calculation of 10% skywave field strength values.

Formula 2. Skywave field strength, 10% of the time (at SS + 6):

The skywave field strength, Fc(10), is given by:

Fc(10) = Fc(50) + [DELTA] dB([MICRO]V/m)

Where:

[DELTA] = 6 when | FM| [LESS THAN]40

[DELTA] = 0.2 | FM| - 2 when 40 [LESS THAN EQUAL TO]| FM| [LESS THAN EQUAL TO]60

[DELTA] = 10 when | FM| [GREATER THAN]60

(d) Figure 6a depicts angles of departure versus transmission range. These angles may also be computed using the following formulas:

View Image

Where:

d = distance in kilometers

n = 1 for 50% field strength values

n = 2 or 3 for 10% field strength values

and where

K1 = 0.00752

K2 = 0.00938

K3 = 0.00565

Note: Computations using these formulas should not be carried beyond 0.1 degree.

(e) In the event of disagreement between computed values using the formulas shown above and values obtained directly from the figures, the computed values will control.

View Image

View Image

View Image

View Image

View Image

View Image

View Image

View Image

View Image

View Image

View Image

View Image

View Image

47 C.F.R. §73.190

28 FR 13574, Dec. 14, 1963, as amended at 30 FR 12720, Oct. 6, 1965; 33 FR 15420, Oct. 17, 1968; 48 FR 42959, Sept. 20, 1983; 49 FR 43963, Nov. 1, 1984; 50 FR 18844, May 2, 1985; 51 FR 4753, Feb. 7, 1986; 52 FR 36879, Oct. 1, 1987; 56 FR 64869, Dec. 12, 1991