Section 2.1072 - Limitation on Supplier's Declaration of Conformity(a) Supplier's Declaration of Conformity signifies that the responsible party, as defined in § 2.909 , has determined that the equipment has been shown to comply with the applicable technical standards and other applicable requirements if no unauthorized change is made in the equipment and if the equipment is properly maintained and operated. Compliance with these standards and other applicable requirements shall not be construed to be a finding by the responsible party with respect to matters not encompassed by the Commission's rules.(b) Supplier's Declaration of Conformity by the responsible party, as defined in § 2.909 , is effective until a termination date is otherwise established by the Commission.(c) No person shall, in any advertising matter, brochure, etc., use or make reference to Supplier's Declaration of Conformity in a deceptive or misleading manner or convey the impression that such Supplier's Declaration of Conformity reflects more than a determination by the manufacturer, importer, integrator, or responsible party, as defined in § 2.909 , that the device or product has been shown to be capable of complying with the applicable technical standards of the Commission's rules.82 FR 50829, Nov. 2, 2017, as amended at 88 FR 7625, Feb. 6, 2023 82 FR 50829, 11/2/2017; as amended at 88 FR 7625, 2/6/2023