Section 189.55-5 - Plans and specifications required for new construction(a)General.(2) General arrangement plan of decks, holds, inner bottoms, etc., and including inboard and outboard profile.(b)Hull structure.(1) * Inner bottom plating and framing.(3) * Shell plating and framing.(4) * Stem, stern frame, and rudder.(5) * Structural deck plans for strength decks.(6) * Pillars and girders.(7) * Watertight and oiltight bulkheads.(8) * Foundations for main machinery and boilers.(9) * Arrangement of ports, doors, and airports in shell plating.(10) * Hatch coamings and covers in weather and watertight decks.(11) * Details of hinged subdivision watertight doors and operating gear.(12) * Scuppers and drains penetrating shell plating.(13) Weight handling gear when required by the Officer in Charge, Marine Inspection, as provided for by § 189.35-9 .(c)Subdivision and stability. Plans required by part 170 of this chapter.(d)Fire control.(1) General arrangement plans showing for each deck the control stations, the various fire sections enclosed by fire resisting bulkheads, the arrangement of the alarm and extinguishing systems, the fire extinguishers, means of access to different compartments and decks and the ventilation system including location of ventilation shutdowns, positions of dampers and the number identifying each system.(2) Ventilation diagram including dampers and other fire control features.(3) Details of alarm systems.(4) Details of extinguishing systems, including fire mains, carbon dioxide, clean agent, foam, and sprinkling systems.(e)Marine engineering. For plans required for marine engineering equipment and systems. See Subchapter F (Marine Engineering) of this chapter.(f)Electrical engineering. For plans required for electrical engineering, equipment, and systems, see Subchapter J (Electrical Engineering) of this chapter.(g)Lifesaving equipment. These plans are to show the location and arrangement of embarkation decks, all overboard discharges and projections in way of launching lifeboats, weights of lifeboats fully equipped and loaded, working loads of davits and winches, types and sizes of falls, the manufacturer's name and identification for all equipment, and all other relevant and necessary information.(1) Arrangement of lifeboats.(2) Arrangement of davits.(3) Location and stowage of liferafts and buoyant apparatus.(h)Accommodations for crewmembers and scientific personnel. Arrangement plans showing accommodations, ventilation, escapes, hospitals, and sanitary facilities for all crewmembers and scientific personnel.(i)Magazines and magazine vans.(1) All plans relating to the arrangement, construction, ventilation, and fire protection system for magazines and magazine vans. (The plans required for magazines and magazine vans to be installed or carried on a vessel after the vessel is in operation, are set forth in subpart 195.11 of this subchapter.)(2) Ventilation and sprinkler system calculations for magazines and magazine vans.(j) For vessels of 100 meters (328 feet) or more in length contracted for on or after September 7, 1990, a plan must be included which shows how visibility from the navigation bridge will meet the standards contained in § 190.02-15 of this subchapter.CGFR 67-83, 33 FR 1118, Jan. 27, 1968, as amended by CGD 79-023, 48 FR 51052, Nov. 4, 1983; CGD 85-099, 55 FR 32249, Aug. 8, 1990; CGD 88-032, 56 FR 35829, July 29, 1991; 56 FR 46354, Sept. 11, 1991; 56 FR 50754, Oct. 8, 1991; USCG-2006-24797, 77 FR 33893 , June 7, 2012