Section 162.060-22 - Marking requirements(a) Each ballast water management system (BWMS) manufactured under Coast Guard approval must have a nameplate which is securely fastened to the BWMS and plainly marked by the manufacturer with the information listed in paragraph (b) of this section.(b) Each nameplate must include the following information:(1) Coast Guard approval number assigned to the BWMS in the certificate of approval.(2) Name of the manufacturer.(3) Name and model number of the BWMS.(4) The manufacturer's serial number for the BWMS.(5) The month and year of manufacture completion.(6) The maximum allowable working pressure for the BWMS.(c) The information required by paragraph (b) of this section must appear on a nameplate attached to, or in lettering on, the BWMS. The nameplate or lettering must be capable of withstanding the combined effects of normal wear and tear and exposure to water, salt spray, direct sunlight, heat, cold, and any substance used in the normal operation and maintenance of the BWMS without loss of readability. The nameplate must not be obscured by paint, corrosion, or other materials that would hinder readability.USCG-2001-10486, 77 FR 17311, Mar. 23, 2012, as amended by 77 FR 33970, June 8, 2012