Section 111.33-3 - Nameplate data(a) Each semiconductor converter system must have a nameplate of durable material affixed to the unit that meets the requirements of-(1) Section 4.31.19.12 of IEEE 45.2-2011 (incorporated by reference; see 46 CFR 110.10-1 ); or(2) Clause 8 of IEC 60092-304:1980 (incorporated by reference; see 46 CFR 110.10-1 ).(b) Each semiconductor rectifier system must have a nameplate containing the words "marine semiconductor rectifier," and the following information:(1) Manufacturer's name and address.(2) Manufacturer's serial number.(10) Ambient temperature range.(c) If, on small converters, the information required by paragraph (a) of this section cannot be shown because of space limitations, the nameplate must be at least large enough to contain the manufacturer's name and serial number. The remaining information must be shown on the schematic diagram.CGD 74-125A, 47 FR 15236, Apr. 8, 1982, as amended by CGD 94-108, 61 FR 28279, June 4, 1996; USCG-2003-16630, 73 FR 65197, Oct. 31, 2008; USCG-2013-0671, 78 FR 60153, Sept. 30, 2013