Section 39.1005 - [Effective 10/18/2024] Incorporation by reference-TB/ALL(a) Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51 . All approved incorporation by reference (IBR) material is available for inspection at the Coast Guard and at the National Archives and Records Administration (NARA). Contact Coast Guard at: Commandant (CG-ENG-4), U.S. Coast Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE, Washington, DC 20593-7509; email typeapproval@uscg.mil or visit www.dco.uscg.mil/CG-ENG-4/. For information on the availability of this material at NARA, visit www.archives.gov/federal-register/cfr/ibr-locations.html or email fr.inspection@nara.gov. The material may be obtained from the sources in the following paragraphs of this section.(b) American National Standards Institute (ANSI), 25 West 43rd Street, 4th floor, New York, NY 10036. (1) ANSI B16.5, Steel Pipe Flanges and Flanged Fittings, 1981, IBR approved for §§ 39.2001(i) and 39.6001(k) .(c) American Petroleum Institute (API), 1220 L Street NW., Washington, DC 20005. (1) API Standard 2000, Venting Atmospheric and Low-Pressure Storage Tanks (Non-refrigerated and Refrigerated), Third Edition, January 1982 (reaffirmed December 1987)("API 2000"), IBR approved for § 39.2011(b) .(d) ASTM International (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. (1) ASTM F1122-87 (Reapproved1992)-Standard Specification for Quick Disconnect Couplings ("ASTM F1122"), IBR approved for § 39.2001(k) .(2) ASTM F1271-Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protection Applications ("ASTM F1271"), December 29, 1989, IBR approved for § 39.2009(a) .(e) International Electrotechnical Commission (IEC), Bureau Central de la Commission Electrotechnique Internationale, 3, rue de Varembe, P.O. Box 131, CH-1211 Geneva 20, Switzerland. (1) IEC 60309-1 Plugs, Socket-Outlets and Couplers for Industrial Purposes-Part 1: General Requirements, Edition 4.2 2012-06, IBR approved for § 39.2009(a) .(2) IEC 60309-2 Plugs, Socket-Outlets and Couplers for Industrial Purposes-Part 2: Dimensional Interchangeability Requirements for Pin and Contact-tube Accessories, Edition 4.2 2012-05, IBR approved for § 39.2009(a) .(f) International Maritime Organization (IMO), 4 Albert Embankment, London SE1 7SR, United Kingdom. (1) International Convention for the Safety of Life at Sea, Consolidated Text of the 1974 SOLAS Convention, the 1978 SOLAS Protocol, the 1981 and 1983 SOLAS Amendments (1986) ("SOLAS"), IBR approved for § 39.2001(e) .(g) International Organization for Standardization (ISO), ISO Central Secretariat Chemin de Blandonnet 8. CP 401-1214 Vernier, Geneva, Switzerland phone 41 22 749 01 11; www.iso.org/contact-iso.html.(1) ISO 15364:2021(E), Ships and Marine Technology-Pressure-vacuum valves for cargo tanks and devices to prevent the passage of flame into cargo tanks, Fourth Edition, February 2021 ("ISO 15364"); IBR approved for § 39.2011(b) .(h) National Electrical Manufacturers Association (NEMA), 1300 North 17th Street, Suite 1752, Rosslyn, VA 22209. (1) ANSI NEMA WD-6-Wiring Devices, Dimensional Requirements, 1988 ("NEMA WD-6"), IBR approved for § 39.2009(a) (i) National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, MA 02169-7471. (1) NFPA 70-National Electrical Code, 2011, IBR approved for § 39.2009(a) .(j) Oil Companies International Marine Forum (OCIMF), 29 Queen Anne's Gate, London SWIH 9BU, England. (1) International Safety Guide for Oil Tankers and Terminals, Fifth Edition, 2006 ("ISGOTT"), IBR approved for §§ 39.3001(g) , 39.5001(c) , 39.6001(g) , and 39.6005(a) .USCG-1999-5150, 78 FR 42642, July 16, 2013, as amended by USCG-2020-0304, 85 FR 58282, Sept. 18, 2020 At 78 FR 60147, Sept. 30, 2013, § 39.1005 was amended; however, the amendment could not be incorporated due to inaccurate amendatory instruction.