Section 600.206-12 - Calculation and use of FTP-based and HFET-based fuel economy, CO[2] emissions, and carbon-related exhaust emission values for vehicle configurations(a) Fuel economy, CO2 emissions, and carbon-related exhaust emissions values determined for each vehicle under § 600.113-08(a) and (b) and as approved in § 600.008(c) , are used to determine FTP-based city, HFET-based highway, and combined FTP/Highway-based fuel economy, CO2 emissions, and carbon-related exhaust emission values for each vehicle configuration for which data are available. Note that fuel economy for some alternative fuel vehicles may mean miles per gasoline gallon equivalent and/or miles per unit of fuel consumed. For example, electric vehicles will determine miles per kilowatt-hour in addition to miles per gasoline gallon equivalent, and fuel cell vehicles will determine miles per kilogram of hydrogen. (1) If only one set of FTP-based city and HFET-based highway fuel economy values is accepted for a subconfiguration at which a vehicle configuration was tested, these values, rounded to the nearest tenth of a mile per gallon, comprise the city and highway fuel economy values for that subconfiguration. If only one set of FTP-based city and HFET-based highway CO2 emissions and carbon-related exhaust emission values is accepted for a subconfiguration at which a vehicle configuration was tested, these values, rounded to the nearest gram per mile, comprise the city and highway CO2 emissions and carbon-related exhaust emission values for that subconfiguration. The appropriate CO2 values for fuel economy labels based on testing with E10 test fuel are the measured tailpipe CO2 emissions for the test cycle multiplied by 1.0166.(2) If more than one set of FTP-based city and HFET-based highway fuel economy and/or carbon-related exhaust emission values are accepted for a vehicle configuration: (i) All data shall be grouped according to the subconfiguration for which the data were generated using sales projections supplied in accordance with § 600.208-12(a)(3) .(ii) Within each group of data, all fuel economy values are harmonically averaged and rounded to the nearest 0.0001 of a mile per gallon and all CO2 emissions and carbon-related exhaust emission values are arithmetically averaged and rounded to the nearest tenth of a gram per mile in order to determine FTP-based city and HFET-based highway fuel economy, CO2 emissions, and carbon-related exhaust emission values for each subconfiguration at which the vehicle configuration was tested. The appropriate CO2 values for fuel economy labels based on testing with E10 test fuel are the measured tailpipe CO2 emissions for the test cycle multiplied by 1.0166.(iii) All FTP-based city fuel economy, CO2 emissions, and carbon-related exhaust emission values and all HFET-based highway fuel economy and carbon-related exhaust emission values calculated in paragraph (a)(2)(ii) of this section are (separately for city and highway) averaged in proportion to the sales fraction (rounded to the nearest 0.0001) within the vehicle configuration (as provided to the Administrator by the manufacturer) of vehicles of each tested subconfiguration. Fuel economy values shall be harmonically averaged, and CO2 emissions and carbon-related exhaust emission values shall be arithmetically averaged. The resultant fuel economy values, rounded to the nearest 0.0001 mile per gallon, are the FTP-based city and HFET-based highway fuel economy values for the vehicle configuration. The resultant CO2 emissions and carbon-related exhaust emission values, rounded to the nearest tenth of a gram per mile, are the FTP-based city and HFET-based highway CO2 emissions and carbon-related exhaust emission values for the vehicle configuration. Note that the appropriate vehicle subconfiguration CO2 values for fuel economy labels based on testing with E10 test fuel are adjusted as described in paragraph (a)(1) or (a)(2)(ii) of this section.(3)(i) For the purpose of determining average fuel economy under § 600.510, the combined fuel economy value for a vehicle configuration is calculated by harmonically averaging the FTP-based city and HFET-based highway fuel economy values, as determined in paragraph (a)(1) or (2) of this section, weighted 0.55 and 0.45 respectively, and rounded to the nearest 0.0001 mile per gallon. A sample of this calculation appears in appendix II to this part.(ii) For the purpose of determining average carbon-related exhaust emissions under § 600.510, the combined carbon-related exhaust emission value for a vehicle configuration is calculated by arithmetically averaging the FTP-based city and HFET-based highway carbon-related exhaust emission values, as determined in paragraph (a)(1) or (2) of this section, weighted 0.55 and 0.45 respectively, and rounded to the nearest tenth of gram per mile.(4) For alcohol dual fuel automobiles and natural gas dual fuel automobiles the procedures of paragraphs (a)(1) or (2) of this section, as applicable, shall be used to calculate two separate sets of FTP-based city, HFET-based highway, and combined values for fuel economy, CO2 emissions, and carbon-related exhaust emissions for each configuration.(i) Calculate the city, highway, and combined fuel economy, CO2 emissions, and carbon-related exhaust emission values from the tests performed using gasoline or diesel test fuel.(ii) Calculate the city, highway, and combined fuel economy, CO2 emissions, and carbon-related exhaust emission values from the tests performed using alcohol or natural gas test fuel.(b) If only one equivalent petroleum-based fuel economy value exists for an electric vehicle configuration, that value, rounded to the nearest tenth of a mile per gallon, will comprise the petroleum-based fuel economy for that configuration.(c) If more than one equivalent petroleum-based fuel economy value exists for an electric vehicle configuration, all values for that vehicle configuration are harmonically averaged and rounded to the nearest 0.0001 mile per gallon for that configuration.76 FR 39551, July 6, 2011