Statutes, codes, and regulations
Code of Federal Regulations
Title 40 - PROTECTION OF ENVIRONMENTChapter I - ENVIRONMENTAL PROTECTION AGENCYSubchapter N - EFFLUENT GUIDELINES AND STANDARDSPart 463 - PLASTICS MOLDING AND FORMING POINT SOURCE CATEGORY
Subpart A - CONTACT COOLING AND HEATING WATER SUBCATEGORY
Section 463.14 - New source performance standards

40 C.F.R. § 463.14

Download
PDF
Current through October 31, 2024
Section 463.14 - New source performance standards
(a) NSPS for bis(2-ethylhexyl) phthalate are reserved.
(b) Any new source subject to this subpart must achieve performance standards (i.e., mass of pollutant discharged), which are calculated by multiplying the average process water usage flow rate for the contact cooling and heating water processes at a new source times the following pollutant concentrations:

Subpart A

[Contact cooling and heating water]

Concentration used to calculate NSPS
Pollutant or pollutant property Maximum for any 1 day (mg/l)
BOD526
Oil and grease29
TSS19
pH(1)

1 Within the range of 6.0 to 9.0 at all times.

The permit authority will obtain the average process water usage flow rate for the new source contact cooling and heating water processes from the permittee.

40 C.F.R. §463.14