40 C.F.R. § 426.136
Current through October 31, 2024
Any new source subject to this subpart that introduces process wastewater pollutants into a publicly owned treatment works must comply with 40 CFR part 403 . In addition, the following pretreatment standard establishes the quantity or quality of pollutants or pollutant properties controlled by this section which may be discharged to a publicly owned treatment works by a new point source subject to the provisions of this subpart.
| Pollutant or pollutant property | Pretreatment standards (mg/l) | |
| Maximum for any 1 day | Average of daily values for 30 consecutive days shall not exceed- | |
| (a): | ||
| Fluoride | 26.0 | 13.0 |
| Lead | (1) | (1) |
| TSS | (1) | (1) |
| pH | (1) | (1) |
| (b): | ||
| Fluoride | 26.0 | 13.0 |
| Lead | (1) | (1) |
| TSS | (1) | (1) |
| pH | (1) | (1) |
| (c): | ||
| TSS | (1) | (1) |
| pH | (1) | (1) |
1 No limitation.
40 C.F.R. §426.136