40 C.F.R. § 98.116

Current through October 31, 2024

Section 98.116 - Data reporting requirements

In addition to the information required by § 98.3(c) , each annual report must contain the information specified in paragraphs (a) through (e) of this section, as applicable:

(a) Annual facility ferroalloy product production capacity (tons).

(b) If a CEMS is used to measure CO₂ emissions, report the annual production for each ferroalloy product identified in § 98.110 , from each EAF (tons).

(c) Total number of EAFs at facility used for production of ferroalloy products.

(d) If a CEMS is used to measure CO₂ emissions, then you must report under this subpart the relevant information required by § 98.36 for the Tier 4 Calculation Methodology and the following information specified in paragraphs (d)(1) through (d)(3) of this section.

(1) Annual process CO₂ emissions (in metric tons) from each EAF used for the production of any ferroalloy product identified in § 98.110 .

(2) Annual process CH₄ emissions (in metric tons) from each EAF used for the production of any ferroalloy listed in Table K-1 of this subpart (metric tons).

(3) Identification number of each EAF.

(e) If a CEMS is not used to measure CO₂ process emissions, and the carbon mass balance procedure is used to determine CO₂ emissions according to the requirements in § 98.113(b) , then you must report the following information specified in paragraphs (e)(1) through (e)(7) of this section.

(1) Annual process CO₂ emissions (in metric tons) from each EAF used for the production of any ferroalloy identified in § 98.110 (metric tons).

(2) Annual process CH₄ emissions (in metric tons) from each EAF used for the production of any ferroalloy listed in Table K-1 of this subpart.

(3) Identification number for each material.

(4)-(5) [Reserved]

(6) List the method used for the determination of carbon content for each material included for the calculation of annual process CO₂ emissions for each EAF (e.g., supplier provided information, analyses of representative samples you collected).

(7) If you use the missing data procedures in § 98.115(b) , you must report how monthly mass of carbon-containing inputs and outputs with missing data was determined and the number of months the missing data procedures were used.

40 C.F.R. §98.116

74 FR 56374 , Oct. 30, 2009, as amended at 75 FR 66462 , Oct. 28, 2010; 78 FR 71954 , Nov. 29, 2013; 79 FR 63785 , Oct. 24, 2014