Section 86.1821-01 - Evaporative/refueling family determination(a) The gasoline-, ethanol-, metha-nol-, liquefied petroleum gas-, and natural gas-fueled vehicles described in a certification application will be divided into groupings expected to have similar evaporative and/or refueling emission characteristics (as applicable) throughout their useful life. Each group of vehicles with similar evaporative and/or refueling emission characteristics shall be defined as a separate evaporative/refueling family. Manufacturers shall use good engineering judgment to determine evaporative/refueling families. This section applies for all sizes and types of vehicles that are subject to evaporative or refueling standards, including those subject to standards under 40 CFR 1037.103 .(b) For vehicles that operate on volatile liquid fuels to be classed in the same evaporative/refueling family, they must be similar with respect to all the following items: (1) Type of vapor storage device (e.g., canister, air cleaner, crankcase).(2) Basic canister design. (i) Working capacity-grams adsorption within a 10 g. range.(ii) System configuration-number of canisters and method of connection (i.e., series, parallel).(iii) Canister geometry, construction and materials.(4) Type of refueling emission control system-non-integrated or integrated with the evaporative control system. Further, if the system is non-integrated, whether or not any other evaporative emissions, e.g. diurnal or hot soak emissions, are captured in the same storage device as the refueling emissions.(5) Fillpipe seal mechanism-mechanical, liquid trap, other.(6) Vapor control system or method of controlling vapor flow through the vapor line to the canister (for example, type of valve, vapor control strategy).(7) Purge control system (for example, type of valve, purge control strategy).(10) Evaporative emission standard or family emission limit (FEL) for testing at low-altitude conditions.(c) Where vehicles are of a type which cannot be divided into evaporative/refueling families based on the criteria listed above (such as non-canister control system approaches), the Administrator will establish families for those vehicles based upon the features most related to their evaporative and/or refueling emission characteristics.(d) Manufacturers may further divide families determined under paragraph (b) of this section provided the Administrator is notified of any such changes prior to or concurrently with the submission of the application for certification (preferably at an annual preview meeting scheduled before the manufacturer begins certification activities for the model year).(e) Manufacturers may petition the Administrator to combine vehicles into a single evaporative/refueling family which would normally not be eligible to be in a single evaporative/refueling family. The petition should provide: (1) Substantial evidence that all the vehicles in the larger grouping will have the same degree of evaporative emission deterioration;(2) Evidence of equivalent component durability over the vehicle's useful life; and(3) Evidence that the groups will result in sufficient In-Use Verification Program data, appropriate tracking in use, and clear liability for the Agency's recall program.(f) For vehicles to be classed in the same leak family, they must be similar with respect to the items listed in paragraph (b) of this section and use the same OBD method for detecting leaks.(g) Determine evaporative/refueling families separately for vehicles subject to standards under 40 CFR 1037.103 based on the criteria in paragraph (b) of this section, even for vehicles you certify based on engineering analysis under 40 CFR 1037.103(c) . In addition, if you certify such vehicles based on testing, include only those vehicle models in the family that are properly represented by that testing, as described in § 86.1828 .64 FR 23925, May 4, 1999, as amended at 79 FR 23725, Apr. 28, 2014; 88 FR 4479, Jan. 24, 2023 88 FR 4479, 3/27/2023; 89 FR 28176, 6/17/2024