Section 86.1811-10 includes text that specifies requirements that differ from §§ 86.1811-04 and 86.1811-09 . Where a paragraph in § 86.1811-04 or § 86.1811-09 is identical and applicable to § 86.1811-10 , this may be indicated by specifying the corresponding paragraph and the statement "[Reserved]. For guidance see § 86.1811-04 " or "[Reserved]. For guidance see § 86.1811-09 ." Where a corresponding paragraph of § 86.1811-04 or § 86.1811-09 is not applicable, this is indicated by the statement "[Reserved]"
Table S10-1-Fleet Average Cold Temperature NMHC Full Useful Life Exhaust Emission Standards
Vehicle weight category | Cold temperature NMHC sales-weighted fleet average standard (grams/mile) |
LDVs & LLDTs ([LESS THAN EQUAL TO]6,000 lbs GVWR) | 0.3 |
HLDTs ([GREATER THAN]6,000-8,500 lbs GVWR) & MDPVs ([GREATER THAN]8,500-10,000 lbs GVWR) | 0.5 |
Table S10-2-Phase-in Percentages for LDV/LLDT Cold Temperature NMHC Requirements
Model year | Percentage of LDV/LLDTs that must meet requirement |
2010 | 25 |
2011 | 50 |
2012 | 75 |
2013 and subsequent | 100 |
Table S10-3-Phase-in Percentages for HLDT/MDPV Cold Temperature NMHC Requirements
Model year | Percentage of HLDT/MDPVs that must meet requirement |
2012 | 25 |
2013 | 50 |
2014 | 75 |
2015 and subsequent | 100 |
LDV/LLDTs:
(6 * API2008) + (5 * API2009) + (4 * API2010) + (3 * API2011) + (2 * API2012) + (1 * API2013) [GREATER THAN EQUAL TO] 500%, and (6 * API2008) + (5 * API2009) + (4 * API2010) [GREATER THAN EQUAL TO] 100%
HLDT/MDPVs:
(6 * API2010) + (5 * API2011) + (4 * API2012) + (3 * API2013) + (2 * API2014) + (1 * API2015) [GREATER THAN EQUAL TO] 500%, and (6 * API2010) + (5 * API2011) + (4 * API2012) [GREATER THAN EQUAL TO] 100%,
or
(6 * API2010) + (5 * API2011) + (4 * API2012) + (3 * API2013) + (2 * API2014) + (1 * API2015) [GREATER THAN EQUAL TO] 600%
Table S10-4-In-Use Standards for Applicable Phase-In LDV/LLDTs
Model Year of Introduction | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 |
Models years that the interim in-use standard is available | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 |
2009 | 2010 | 2011 | 2012 | 2013 | 2014 | |
2010 | 2011 | 2012 | 2013 | 2014 | ||
2011 | 2012 | 2013 |
Table S10-5-In-Use Standards for Applicable Phase-In HLDT/MDPVs
Model Year of Introduction | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 |
Models years that the interim in-use standard is available | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 |
2011 | 2012 | 2013 | 2014 | 2015 | 2016 | |
2012 | 2013 | 2014 | 2015 | 2016 | ||
2013 | 2014 | 2015 |
40 C.F.R. §86.1811-10