Section 86.1801-12 - [Effective 6/17/2024] Applicability(a)Applicability. The provisions of this subpart apply to certain types of new vehicles as described in this paragraph (a). Where the provisions apply for a type of vehicle, they apply for vehicles powered by any fuel, unless otherwise specified. In cases where a provision applies only to a certain vehicle group based on its model year, vehicle class, motor fuel, engine type, or other distinguishing characteristics, the limited applicability is cited in the appropriate section. Testing references in this subpart generally apply to Tier 2 and older vehicles, while testing references to 40 CFR part 1066 generally apply to Tier 3 and newer vehicles; see § 86.101 for detailed provisions related to this transition. The provisions of this subpart apply to certain vehicles as follows:(1) The provisions of this subpart apply for light-duty vehicles and light-duty trucks.(2) The provisions of this subpart apply for medium-duty passenger vehicles. The provisions of this subpart also apply for medium-duty vehicles at or below 14,000 pounds GVWR, except as follows: (i) The provisions of this subpart are optional for diesel-cycle vehicles through model year 2017; however, if you are using the provisions of § 86.1811-17(b)(9) or § 86.1816-18(b)(8) to transition to the Tier 3 exhaust emission standards, the provisions of this subpart are optional for those diesel-cycle vehicles until the start of the Tier 3 phase-in for those vehicles.(ii) The exhaust emission standards of this part are optional for vehicles above 22,000 pounds GCWR and for all incomplete medium-duty vehicles. Certain requirements in this subpart apply for such vehicles even if they are not certified to the exhaust emission standards of this subpart as follows:(A) Such vehicles remain subject to the evaporative and refueling emission standards of this subpart.(B) Such vehicles may remain subject to the greenhouse gas standards in § 86.1819-14 as specified in 40 CFR 1036.635.(C) Such vehicles may remain subject to onboard diagnostic requirements a specified in 40 CFR 1036.110 .(iii) The provisions of this subpart are optional for diesel-fueled Class 3 heavy-duty vehicles in a given model year if those vehicles are equipped with engines certified to the appropriate standards in § 86.007-11 or 40 CFR 1036.104 for which less than half of the engine family's sales for the model year in the United States are for complete Class 3 heavy-duty vehicles. This includes engines sold to all vehicle manufacturers. If you are the original manufacturer of the engine and the vehicle, base this showing on your sales information. If you manufacture the vehicle but are not the original manufacturer of the engine, you must use your best estimate of the original manufacturer's sales information.(3) The provisions of this subpart do not apply to heavy-duty vehicles above 14,000 pounds GVWR (see § 86.016-1 and 40 CFR parts 1036 and 1037), except as follows: (i) Heavy-duty vehicles above 14,000 pounds GVWR may be optionally certified to the exhaust emission standards in this subpart, including the greenhouse gas emission standards, if they are properly included in a test group with similar vehicles at or below 14,000 pounds GVWR. Emission standards apply to these vehicles as if they were Class 3 medium-duty vehicles. The work factor for these vehicles may not be greater than the largest work factor that applies for vehicles in the test group that are at or below 14,000 pounds GVWR (see § 86.1819-14 ).(ii) The greenhouse gas standards apply for certain vehicles above 14,000 pounds GVWR as specified in § 86.1819-14 .(iii) Evaporative and refueling emission standards apply for heavy-duty vehicles above 14,000 pounds GVWR as specified in 40 CFR 1037.103 .(4) If you optionally certify vehicles to standards under this subpart, those vehicles are subject to all the regulatory requirements as if the standards were mandatory.(b)Relationship to 40 CFR parts 1036 and 1037. If any heavy-duty vehicle is not subject to standards and certification requirements under this subpart, the vehicle and its installed engine are instead subject to standards and certification requirements under 40 CFR parts 1036 and 1037, as applicable. If you optionally certify engines or vehicles to standards under 40 CFR part 1036 or 40 CFR part 1037, respectively, those engines or vehicles are subject to all the regulatory requirements in 40 CFR parts 1036 and 1037 as if they were mandatory. Note that heavy-duty engines subject to greenhouse gas standards under 40 CFR part 1036 before model year 2027 are also subject to standards and certification requirements under subpart A of this part 86.(c)Clean alternative fuel conversions. The provisions of this subpart also apply to clean alternative fuel conversions as defined in 40 CFR 85.502 of all vehicles described in paragraph (a) of this section.(d)Small-volume manufacturers. Special certification procedures are available for small-volume manufacturers as described in § 86.1838.(e)You. The term "you" in this subpart refers to manufacturers subject to the emission standards and other requirements of this subpart.(f)Vehicle. The term "vehicle", when used generically, does not exclude any type of vehicle for which the regulations apply (such as light-duty trucks).(g)Complete and incomplete vehicles. Several provisions in this subpart, including the applicability provisions described in this section, are different for complete and incomplete vehicles. We differentiate these vehicle types as described in 40 CFR 1037.801 .(h)Applicability of provisions of this subpart to light-duty vehicles, light-duty trucks, medium-duty passenger vehicles, and heavy-duty vehicles. Numerous sections in this subpart provide requirements or procedures applicable to a "vehicle" or "vehicles." Unless otherwise specified or otherwise determined by the Administrator, the term "vehicle" or "vehicles" in those provisions apply equally to light-duty vehicles (LDVs), light-duty trucks (LDTs), medium-duty passenger vehicles (MDPVs), and heavy-duty vehicles (HDVs), as those terms are defined in § 86.1803-01 . Note that this subpart also identifies heavy-duty vehicles at or below 14,000 pounds GVWR that are not medium-duty passenger vehicles as medium-duty vehicles.(i)Types of pollutants. Emission standards and related requirements apply for different types of pollutants as follows:(1)Criteria pollutants. Criteria pollutant standards apply for NOX, NMOG, HC, formaldehyde, PM, and CO, including exhaust, evaporative, and refueling emission standards. These pollutants are sometimes described collectively as "criteria pollutants" because they are either criteria pollutants under the Clean Air Act or precursors to the criteria pollutants ozone and PM.(2)Greenhouse gas emissions. This subpart contains standards and other regulations applicable to the emission of the air pollutant defined as the aggregate group of six greenhouse gases: carbon dioxide, nitrous oxide, methane, hydrofluorocarbons, perfluorocarbons, and sulfur hexafluoride.(3)Nomenclature. Numerous sections in this subpart refer to requirements relating to "exhaust emissions." Unless otherwise specified or otherwise determined by the Administrator, the term "exhaust emissions" refers at a minimum to emissions of all pollutants described by emission standards in this subpart, including carbon dioxide (CO2), nitrous oxide (N2 O), and methane (CH4).(j)Exemption from greenhouse gas emission standards for small businesses. Manufacturers that qualify as a small business under the Small Business Administration regulations in 13 CFR part 121 are exempt from certain standards and associated provisions as specified in §§ 86.1815, 86.1818, and 86.1819 and in 40 CFR part 600 . This exemption applies to both U.S.-based and non-U.S.-based businesses. The following categories of businesses (with their associated NAICS codes) may be eligible for exemption based on the Small Business Administration size standards in 13 CFR 121.201 :(1) Vehicle manufacturers (NAICS code 336111).(2) Independent commercial importers (NAICS codes 811111, 811112, 811198, 423110, 424990, and 441120).(3) Alternate fuel vehicle converters (NAICS codes 335312, 336312, 336322, 336399, 454312, 485310, and 811198).(k)Conditional exemption from greenhouse gas emission standards. Manufacturers may request a conditional exemption from compliance with the emission standards described in § 86.1818-12(c) through (e) and associated provisions in this part and in part 600 of this chapter for model years 2012 through 2016. For the purpose of determining eligibility the sales of related companies shall be aggregated according to the provisions of § 86.1838-01(b)(3) or, if a manufacturer has been granted operational independence status under § 86.1838-01(d) , eligibility shall be based on that manufacturer's vehicle production. (2) Maintaining eligibility for exemption from greenhouse gas emission standards. To remain eligible for exemption under this paragraph (k) the manufacturer's average sales for the three most recent consecutive model years must remain below 5,000. If a manufacturer's average sales for the three most recent consecutive model years exceeds 4999, the manufacturer will no longer be eligible for exemption and must meet applicable emission standards according to the provisions in this paragraph (k)(2). (i) If a manufacturer's average sales for three consecutive model years exceeds 4999, and if the increase in sales is the result of corporate acquisitions, mergers, or purchase by another manufacturer, the manufacturer shall comply with the emission standards described in § 86.1818-12(c) through (e) , as applicable, beginning with the first model year after the last year of the three consecutive model years.(ii) If a manufacturer's average sales for three consecutive model years exceeds 4999 and is less than 50,000, and if the increase in sales is solely the result of the manufacturer's expansion in vehicle production, the manufacturer shall comply with the emission standards described in § 86.1818-12(c) through (e) , as applicable, beginning with the second model year after the last year of the three consecutive model years.(iii) If a manufacturer's average sales for three consecutive model years exceeds 49,999, the manufacturer shall comply with the emission standards described in § 86.1818-12(c) through (e) , as applicable, beginning with the first model year after the last year of the three consecutive model years.75 FR 25682, May 7, 2010, as amended at 76 FR 19873, Apr. 8, 2011; 77 FR 63155, Oct. 15, 2012; 79 FR 23706, Apr. 28, 2014; 80 FR 9104, Feb. 19, 2015; 81 FR 73982, Oct. 25, 2016; 88 FR 4478, Jan. 24, 2023 81 FR 73982, 12/27/2016; 88 FR 4478, 3/27/2023; 89 FR 28157, 6/17/2024