You must comply with the emission limits that apply to your affected source in the following table as required by § 63.3490(a) through (c) .
If you apply surface coatings to metal cans or metal can parts in this subcategory ... | Then for all coatings of this type ... | You must meet the following organic HAP emission limit in kg HAP/liter solids (lbs HAP/gal solids):a b |
1. One and two-piece draw and iron can body coating | a. Two-piece beverage cans-all coatings b. Two-piece food cans-all coatings c. One-piece aerosol cans-all coatings | 0.04 (0.31). 0.06 (0.50). 0.08 (0.65). |
2. Sheetcoating | Sheetcoating | 0.02 (0.17). |
3. Three-piece can assembly | a. Inside spray | 0.12 (1.03). |
b. Aseptic side seam stripes on food cans | 1.48 (12.37). | |
c. Nonaseptic side seam stripes on food cans | 0.72 (5.96). | |
d. Side seam stripes on general line nonfood cans | 1.18 (9.84). | |
e. Side seam stripes on aerosol cans | 1.46 (12.14). | |
4. End coating | a. Aseptic end seal compounds | 0.06 (0.54). |
b. Nonaseptic end seal compounds | 0.00 (0.00). | |
c. Repair spray coatings | 0.64 (5.34). |
a If you apply surface coatings of more than one type within any one subcategory you may calculate an OSEL according to § 63.3531(i) .
b Rounding differences in specific emission limits are attributable to unit conversions.
40 C.F.R. 63.1662-63 app Table 1 to Subpart KKKK of Part 63