Statutes, codes, and regulations
Code of Federal Regulations
Title 40 - PROTECTION OF ENVIRONMENTChapter I - ENVIRONMENTAL PROTECTION AGENCYSubchapter C - AIR PROGRAMSPart 63 - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES
Subpart JJJJJJ - NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR INDUSTRIAL, COMMERCIAL, AND INSTITUTIONAL BOILERS AREA SOURCES
Appendix Table 4 to Subpart JJJJJJ of Part 63 - Performance (Stack) Testing Requirements

40 C.F.R. § 63.1662-63 app Table 4 to Subpart JJJJJJ of Part 63

Download
PDF
Current through May 31, 2024
Appendix Table 4 to Subpart JJJJJJ of Part 63 - Performance (Stack) Testing Requirements

As stated in § 63.11212 , you must comply with the following requirements for performance (stack) test for affected sources:

To conduct a performance test for the following pollutant. . .You must. . .Using. . .
1. Particulate Mattera. Select sampling ports location and the number of traverse pointsMethod 1 in appendix A-1 to part 60 of this chapter.
b. Determine velocity and volumetric flow-rate of the stack gasMethod 2, 2F, or 2G in appendix A-2 to part 60 of this chapter.
c. Determine oxygen and carbon dioxide concentrations of the stack gasMethod 3A or 3B in appendix A-2 to part 60 of this chapter, or ASTM D6522-00 (Reapproved 2005),a or ANSI/ASME PTC 19.10-1981.a
d. Measure the moisture content of the stack gasMethod 4 in appendix A-3 to part 60 of this chapter.
e. Measure the particulate matter emission concentrationMethod 5 or 17 (positive pressure fabric filters must use Method 5D) in appendix A-3 and A-6 to part 60 of this chapter and a minimum 1 dscm of sample volume per run.
f. Convert emissions concentration to lb/MMBtu emission ratesMethod 19 F-factor methodology in appendix A-7 to part 60 of this chapter.
2. Mercurya. Select sampling ports location and the number of traverse pointsMethod 1 in appendix A-1 to part 60 of this chapter.
b. Determine velocity and volumetric flow-rate of the stack gasMethod 2, 2F, or 2G in appendix A-2 to part 60 of this chapter.
c. Determine oxygen and carbon dioxide concentrations of the stack gasMethod 3A or 3B in appendix A-2 to part 60 of this chapter, or ASTM D6522-00 (Reapproved 2005),a or ANSI/ASME PTC 19.10-1981.a
d. Measure the moisture content of the stack gasMethod 4 in appendix A-3 to part 60 of this chapter.
e. Measure the mercury emission concentrationMethod 29, 30A, or 30B in appendix A-8 to part 60 of this chapter or Method 101A in appendix B to part 61 of this chapter or ASTM Method D6784-02.a Collect a minimum 2 dscm of sample volume with Method 29 of 101A per run. Use a minimum run time of 2 hours with Method 30A.
f. Convert emissions concentration to lb/MMBtu emission ratesMethod 19 F-factor methodology in appendix A-7 to part 60 of this chapter.
3. Carbon Monoxidea. Select the sampling ports location and the number of traverse pointsMethod 1 in appendix A-1 to part 60 of this chapter.
b. Determine oxygen and carbon dioxide concentrations of the stack gasMethod 3A or 3B in appendix A-2 to part 60 of this chapter, or ASTM D6522-00 (Reapproved 2005),a or ANSI/ASME PTC 19.10-1981.a
c. Measure the moisture content of the stack gasMethod 4 in appendix A-3 to part 60 of this chapter.
d. Measure the carbon monoxide emission concentrationMethod 10, 10A, or 10B in appendix A-4 to part 60 of this chapter or ASTM D6522-00 (Reapproved 2005)a and a minimum 1 hour sampling time per run.

a Incorporated by reference, see § 63.14 .

40 C.F.R. 63.1662-63 app Table 4 to Subpart JJJJJJ of Part 63