40 C.F.R. § 63 app Figure 1 to Subpart G of Part 63

Current through May 31, 2024
Appendix Figure 1 to Subpart G of Part 63 - Definitions of Terms Used in Wastewater Equations

Main Terms

AMR = Actual mass removal of Table 8 and/or Table 9 compounds achieved by treatment process or a series of treatment processes, kg/hr.

C = Concentration of Table 8 and/or Table 9 compounds in wastewater, ppmw.

CG = Concentration of TOC (minus methane and ethane) or total organic hazardous air pollutants, in vented gas stream, dry basis, ppmv.

CGc = Concentration of TOC or organic hazardous air pollutants corrected to 3-percent oxygen, in vented gas stream, dry basis, ppmv.

CGS = Concentration of sample compounds in vented gas stream, dry basis, ppmv.

E = Removal or destruction efficiency, percent.

Fbio = Site-specific fraction of Table 8 and/or Table 9 compounds biodegraded, unitless.

fbio = Site-specific fraction of an individual Table 8 or Table 9 compound biodegraded, unitless.

Fm = Compound-specific fraction measured factor, unitless (listed in table 34).

Fr = Fraction removal value for Table 8 and/or Table 9 compounds, unitless (listed in Table 9).

Fravg = Flow-weighted average of the Fr values.

i = Identifier for a compound.

j = Identifier for a sample.

k = Identifier for a run.

K2 = Constant, 41.57 * 10-9, (ppm)-1 (gram-mole per standard m3) (kg/g), where standard temperature (gram-mole per standard m3) is 20 °C.

m = Number of samples.

M = Mass, kg.

MW = Molecular weight, kg/kg-mole.

n = Number of compounds.

p = Number of runs.

%O2d = Concentration of oxygen, dry basis, percent by volume.

Q = Volumetric flowrate of wastewater, m3/hr.

QG = Volumetric flow rate of vented gas stream, dry standard, m3/min.

QMG = Mass flowrate of TOC (minus methane and ethane) or organic hazardous air pollutants, in vented gas stream, kg/hr.

QMW = Mass flowrate of Table 8 and/or Table 9 compounds in wastewater, kg/hr.

[RHO] = Density, kg/m3.

RMR = Required mass removal achieved by treatment process or a series of treatment processes, kg/hr.

tT = Total time of all runs, hr.

Subscripts

a = Entering.

b = Exiting.

i = Identifier for a compound.

j = Identifier for a sample.

k = Identifier for a run.

m = Number of samples.

n = Number of compounds.

p = Number of runs.

T = Total; sum of individual.

40 C.F.R. 63 app Figure 1 to Subpart G of Part 63

59 FR 19468, Apr. 22, 1994, as amended at 59 FR 29201, June 6, 1994; 61 FR 63629, Dec. 12, 1995; 62 FR 2779, Jan. 17, 1997; 63 FR 67793, Dec. 9, 1998; 64 FR 20195, Apr. 26, 1999; 65 FR 78284, Dec. 14, 2000; 66 FR 6935, Jan. 22, 2001