Subpart F - PROCEDURES FOR TESTING PERFORMANCE CHARACTERISTICS OF CLASS II EQUIVALENT METHODS FOR PM [2.5]

Appendix Figure F-1 to Subpart F of Part 53 - Designation Testing Checklist
Appendix Table F-1 to Subpart F of Part 53 - Performance Specifications for PM [2.5] Class II Equivalent Samplers
Appendix Table F-2 to Subpart F of Part 53 - Particle Sizes and Wind Speeds for Full Wind Tunnel Test, Wind Tunnel Inlet Aspiration Test, and Static Chamber Test
Appendix Table F-3 to Subpart F of Part 53 - Critical Parameters of Idealized Ambient Particle Size Distributions
Appendix Table F-4 to Subpart F of Part 53 - Estimated Mass Concentration Measurement of PM [2.5] for Idealized Coarse Aerosol Size Distribution
Appendix Table F-5 to Subpart F of Part 53 - Estimated Mass Concentration Measurement of PM [2.5] for Idealized "Typical" Coarse Aerosol Size Distribution
Appendix Table F-6 to Subpart F of Part 53 - Estimated Mass Concentration Measurement of PM [2.5] for Idealized Fine Aerosol Size Distribution
Appendix A to Subpart F of Part 53 - References
Section 53.60 - General provisions
Section 53.61 - Test conditions
Section 53.62 - Test procedure: Full wind tunnel test
Section 53.63 - Test procedure: Wind tunnel inlet aspiration test
Section 53.64 - Test procedure: Static fractionator test
Section 53.65 - Test procedure: Loading test
Section 53.66 - Test procedure: Volatility test