Subpart E - PROCEDURES FOR TESTING PHYSICAL (DESIGN) AND PERFORMANCE CHARACTERISTICS OF REFERENCE METHODS AND CLASS I AND CLASS II EQUIVALENT METHODS FOR PM [2.5] OR PM [10-2.5]
- Appendix Figure E-1 to Subpart E of Part 53 - Designation Testing Checklist
- Appendix Table E-1 to Subpart E of Part 53 - Summary of Test Requirements for Reference and Class I Equivalent Methods for PM [2.5] and PM [10-2.5]
- Appendix Table E-2 to Subpart E of Part 53 - Spectral Energy Distribution and Permitted Tolerance for Conducting Radiative Tests
- Appendix A to Subpart E of Part 53 - References
- Section 53.50 - General provisions
- Section 53.51 - Demonstration of compliance with design specifications and manufacturing and test requirements
- Section 53.52 - Leak check test
- Section 53.53 - Test for flow rate accuracy, regulation, measurement accuracy, and cut-off
- Section 53.54 - Test for proper sampler operation following power interruptions
- Section 53.55 - Test for effect of variations in power line voltage and ambient temperature
- Section 53.56 - Test for effect of variations in ambient pressure
- Section 53.57 - Test for filter temperature control during sampling and post-sampling periods
- Section 53.58 - Operational field precision and blank test
- Section 53.59 - Aerosol transport test for Class I equivalent method samplers