Section 159.7 - Requirements for vessel operators(a) No person may operate any vessel equipped with installed toilet facilities unless it is equipped with:(1) An operable Type II or III device that has a label on it under § 159.16 or that is certified under § 159.12 or § 159.12a ; or(2) An operable Type I device that has a label on it under § 159.16 or that is certified under § 159.12 , if the vessel is 19.7 meters (65 feet) or less in length.(b) When operating a vessel on a body of water where the discharge of treated or untreated sewage is prohibited by the Environmental Protection Agency under 40 CFR 140.3 or 140.4 , the operator must secure each Type I or Type II device in a manner which prevents discharge of treated or untreated sewage. Acceptable methods of securing the device include- (1) Closing the seacock and removing the handle;(2) Padlocking the seacock in the closed position;(3) Using a non-releasable wire-tie to hold the seacock in the closed position; or(4) Locking the door to the space enclosing the toilets with a padlock or door handle key lock.(c) When operating a vessel on a body of water where the discharge of untreated sewage is prohibited by the Environmental Protection Agency under 40 CFR 140.3 , the operator must secure each Type III device in a manner which prevents discharge of sewage. Acceptable methods of securing the device include- (1) Closing each valve leading to an overboard discharge and removing the handle;(2) Padlocking each valve leading to an overboard discharge in the closed position; or(3) Using a non-releasable wire-tie to hold each valve leading to an overboard discharge in the closed position.CGH 95-028, 62 FR 51194, Sept. 30, 1997