The references contained in this appendix provide nonmandatory information that can be helpful in understanding and complying with subpart S of this Part. However, compliance with these standards is not a substitute for compliance with subpart S of this Part.
ANSI/API RP 500-1998 (2002) Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I Division 1 and Division 2.
ANSI/API RP 505-1997 (2002) Recommended Practice for Classification of Locations for Electrical Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1 and Zone 2.
ANSI/ASME A17.1-2004 Safety Code for Elevators and Escalators.
ANSI/ASME B30.2-2005 Overhead and Gantry Cranes (Top Running Bridge, Single or Multiple Girder, Top Running Trolley Hoist).
ANSI/ASME B30.3-2004 Construction Tower Cranes.
ANSI/ASME B30.4-2003 Portal, Tower, and Pedestal Cranes.
ANSI/ASME B30.5-2004 Mobile And Locomotive Cranes.
ANSI/ASME B30.6-2003 Derricks.
ANSI/ASME B30.7-2001 Base Mounted Drum Hoists.
ANSI/ASME B30.8-2004 Floating Cranes And Floating Derricks.
ANSI/ASME B30.11-2004 Monorails And Underhung Cranes.
ANSI/ASME B30.12-2001 Handling Loads Suspended from Rotorcraft.
ANSI/ASME B30.13-2003 Storage/Retrieval (S/R) Machines and Associated Equipment.
ANSI/ASME B30.16-2003 Overhead Hoists (Underhung).
ANSI/ASME B30.22-2005 Articulating Boom Cranes.
ANSI/ASSE Z244.1-2003 Control of Hazardous Energy Lockout/Tagout and Alternative Methods.
ANSI/ASSE Z490.1-2001 Criteria for Accepted Practices in Safety, Health, and Environmental Training.
ANSI/IEEE C2-2002 National Electrical Safety Code.
ANSI K61.1-1999 Safety Requirements for the Storage and Handling of Anhydrous Ammonia.
ANSI/UL 913-2003 Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations.
ASTM D3176-1989 (2002) Standard Practice for Ultimate Analysis of Coal and Coke.
ASTM D3180-1989 (2002) Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases.
NFPA 20-2003 Standard for the Installation of Stationary Pumps for Fire Protection.
NFPA 30-2003 Flammable and Combustible Liquids Code.
NFPA 32-2004 Standard for Drycleaning Plants.
NFPA 33-2003 Standard for Spray Application Using Flammable or Combustible Materials.
NFPA 34-2003 Standard for Dipping and Coating Processes Using Flammable or Combustible Liquids.
NFPA 35-2005 Standard for the Manufacture of Organic Coatings.
NFPA 36-2004 Standard for Solvent Extraction Plants.
NFPA 40-2001 Standard for the Storage and Handling of Cellulose Nitrate Film.
NFPA 58-2004 Liquefied Petroleum Gas Code.
NFPA 59-2004 Utility LP-Gas Plant Code.
NFPA 70-2002 National Electrical Code. (See also NFPA 70-2005.)
NFPA 70E-2000 Standard for Electrical Safety Requirements for Employee Workplaces. (See also NFPA 70E-2004.)
NFPA 77-2000 Recommended Practice on Static Electricity.
NFPA 80-1999 Standard for Fire Doors and Fire Windows.
NFPA 88A-2002 Standard for Parking Structures.
NFPA 91-2004 Standard for Exhaust Systems for Air Conveying of Vapors, Gases, Mists, and Noncombustible Particulate Solids.
NFPA 101-2006 Life Safety Code.
NFPA 496-2003 Standard for Purged and Pressurized Enclosures for Electrical Equipment.
NFPA 497-2004 Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas.
NFPA 505-2006 Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and Operation.
NFPA 820-2003 Standard for Fire Protection in Wastewater Treatment and Collection Facilities.
NMAB 353-1-1979 Matrix of Combustion-Relevant Properties and Classification of Gases, Vapors, and Selected Solids.
NMAB 353-2-1979 Test Equipment for Use in Determining Classifications of Combustible Dusts.
NMAB 353-3-1980 Classification of Combustible Dust in Accordance with the National Electrical Code.
29 C.F.R. 1910 app A to Subpart S of Part 1910