21 C.F.R. § 175.105

Current through September 30, 2024

Section 175.105 - Adhesives

(a) Adhesives may be safely used as components of articles intended for use in packaging, transporting, or holding food in accordance with the following prescribed conditions:

(1) The adhesive is prepared from one or more of the optional substances named in paragraph (c) of this section, subject to any prescribed limitations.

(2) The adhesive is either separated from the food by a functional barrier or used subject to the following additional limitations:

(i)In dry foods. The quantity of adhesive that contacts packaged dry food shall not exceed the limits of good manufacturing practice.

(ii)In fatty and aqueous foods.

(a) The quantity of adhesive that contacts packaged fatty and aqueous foods shall not exceed the trace amount at seams and at the edge exposure between packaging laminates that may occur within the limits of good manufacturing practice.

(b) Under normal conditions of use the packaging seams or laminates will remain firmly bonded without visible separation.

(b) To assure safe usage of adhesives, the label of the finished adhesive container shall bear the statement "food-packaging adhesive".

(c) Subject to any limitation prescribed in this section and in any other regulation promulgated under section 409 of the Act which prescribes safe conditions of use for substances that may be employed as constituents of adhesives, the optional substances used in the formulation of adhesives may include the following:

(1) Substances generally recognized as safe for use in food or food packaging.

(2) Substances permitted for use in adhesives by prior sanction or approval and employed under the specific conditions of use prescribed by such sanction or approval.

(3) Flavoring substances permitted for use in food by regulations in this part, provided that such flavoring substances are volatilized from the adhesives during the packaging fabrication process.

(4) Color additives approved for use in food.

(5) Substances permitted for use in adhesives by other regulations in this subchapter and substances named in this subparagraph: Provided, however, That any substance named in this paragraph and covered by a specific regulation in this subchapter, must meet any specifications in such regulation.

Substances	Limitations
Abietic acid
Acetone
Acetone-formaldehyde condensate (CAS Reg. No. 25619-09-4)
Acetone-urea-formaldehyde resin
N-Acetyl ethanolamine
Acetyl tributyl citrate
Acetyl triethyl citrate
2-Acrylamido-2-methyl-propanesulfonic acid, homopolymer, sodium salt (CAS Reg. No. 35641-59-9)
Albumin, blood
(2-Alkenyl) succinic anhydrides in which the alkenyl groups are derived from olefins which contain not less than 78 percent C30 and higher groups (CAS Reg. No. 70983-55-0)
4-[2-[2-2-(Alkoxy (C12-C15) ethoxy) ethoxy]ethyl] disodium sulfosuccinate
1-Alkyl (C6-C18) amino-3-amino-propane monoacetate
Alkylated (C4 and/or C8) phenols
Alkyl (C7-C12) benzene
Alkyl (C10-C20) dimethylbenzyl ammonium chloride
n-Alkyl(C12, C14, C16, or C18) dimethyl (ethylbenzyl) ammonium cyclohexylsulfamate	For use as preservative only.
Alkyl ketene dimers as described in § 176.120 of this chapter
Alkyl (C7-C12) naphthalene
alpha Olefin sulfonate [alkyl group is in the range of C10-C18 with not less than 50 percent C14-C16], ammonium, calcium, magnesium, potassium, and sodium salts
2-[(2-aminoethyl)amino]ethanol (CAS Reg. No. 111-41-1)
3-Aminopropanediol	For use only in the preparation of polyurethane resins.
Aluminum
Aluminum acetate
Aluminum di(2-ethylhexoate)
Aluminum potassium silicate
N-[BETA]-Aminoethyl-gamma-aminopropyl trimethoxysilane
3-(Aminomethyl)-3,5,5-trimethylcyclohexylamine
Aminomethylpropanol
Ammonium benzoate	For use as preservative only.
Ammonium bifluoride	For use only as bonding agent for aluminum foil, stabilizer or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesive.
Ammonium borate
Ammonium citrate
Ammonium persulfate
Ammonium polyacrylate
Ammonium potassium hydrogen phosphate
Ammonium silico-fluoride	For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesive.
Ammonium sulfamate
Ammonium thiocyanate
Ammonium thiosulfate
Amyl acetate
Anhydroenneaheptitol
Animal glue as described in § 178.3120 of this chapter
2-Anthraquinone sulfonic acid, sodium salt	For use only as polymerization-control agent.
Antimony oxide
Asbestos
Asphalt, paraffinic and naphthenic
Azelaic acid
Azo-bis-isobutyronitrile
Balata rubber
Barium acetate
Barium peroxide
Barium sulfate
Bentonite
Benzene (benzol)
1,4-Benzenedicarboxylic acid, bis[2-(1,1-dimethylethyl)-6-[[3-(1,1-dimethylethyl)-2-hydroxy-5-methylphenyl]methyl]-4-methyl-phenyl]ester (CAS Reg. No. 57569-40-1)	For use as a stabilizer.
1,2-Benzisothiazolin-3-one (CAS Registry No. 2634-33-5)	For use as preservative only.
Benzothiazyldisulfide
p-Benzoxyphenol	For use as preservative only.
Benzoyl peroxide
Benzyl alcohol
Benzyl benzoate
Benzyl bromoacetate	For use as preservative only.
p-Benzyloxyphenol	Do.
BHA (butylated hydroxyanisole)
BHT (butylated hydroxytoluene)
Bicyclo[2.2.1]hept-2-ene-6-methyl acrylate
2-Biphenyl diphenyl phosphate
Bis(benzoate-O)(2-propanolato)aluminum (CAS Reg. No. 105442-85-1)	For use only as a reactant in the preparation of polyester resins.
1,2-Bis(3,5-di-tert-butyl-4-hydroxyhydrocinnamoyl)hy-drazine (CAS Reg. No. 32687-78-8)	For use at a level not to exceed 2 percent by weight of the adhesive.
1,3-Bis(2-benzothiazolylmercaptomethyl) urea
4,4'-Bis([ALPHA],[ALPHA]-dimethylbenzyl)diphenylamine
2,6-Bis(1,1-dimethylethyl)-4-(1-methylpropyl)phenol (CAS Reg. No. 17540-75-9)	For use as an antioxidant and/or stabilizer only.
2,6-Bis (1-methylheptadecyl)-p-cresol
4-[[4, 6-Bis(octylthio)6-Bis(octylthio)6-Bis(octylthio)-s-triazin-2-yl]amino]-2,6-di- tert-butylphenol (CAS Reg. No. 991-84-4)
Bis(tri-n-butyltin) oxide	For use as preservative only.
Bis(trichloromethyl)sulfone C.A. Registry No. 3064-70-8	Do.
Borax
Boric acid
2-Bromo-2-nitro-1, 3-propanediol (CAS Reg. No. 52-51-7)	For use only as an antibacterial preservative.
Butanedioic acid, sulfo-1,4-di-(C9-C11 alkyl) ester, ammonium salt (also known as butanedioic acid, sulfo-1,4-diisodecyl ester, ammonium salt [CAS Reg. No. 144093-88-9]).	For use as a surface active agent in adhesives.
1,3-Butanediol
1,4-Butanediol
1,4-Butanediol modified with adipic acid
Butoxy polyethylene polyproplyene glycol (molecular weight 900-4,200)
Butyl acetate
Butyl acetyl ricinoleate
Butyl alcohol
Butylated reaction product of p-cresol and dicyclopentadiene	As identified in § 178.2010(b) of this chapter.
Butylated, styrenated cresols identified in § 178.2010(b) of this chapter
Butyl benzoate
1,3-Butylene glycoldiglycolic acid copolymer
tert-Butyl hydroperoxide
4,4'-Butylidenebis(6-tert-butyl-m-cresol)
Butyl lactate
p-tert-Butylphenyl salicylate
p-tert-Butylpyrocatechol	For use only as polymerization-control agent.
Butyl ricinoleate
Butyl rubber polymer
Butyl stearate
Butyl titanate, polymerized
Butyraldehyde
Calcium ethyl acetoacetate
Calcium nitrate
Calcium metasilicate
Camphor
Camphor fatty acid esters
Candelilla wax
epsilon-Caprolactam-(ethylene-ethyl acrylate) graft polymer
Carbon black, channel process
Carbon disulfide-1,1'-methylenedipiperidine reaction product
Carbon tetrachloride
Carboxymethylcellulose
Castor oil, polyoxyethylated (4-84 moles ethylene oxide)
Cellulose acetate butyrate
Cellulose acetate propionate
Ceresin wax (ozocerite)
Cetyl alcohol
Chloracetamide
Chloral hydrate
Chlorinated liquid n-paraffins with chain lengths of C10-C17, containing 40-70 percent chlorine by weight
Chlorinated pyridine mixture with active ingredients consisting of 2,3,5,6-tetrachloro-4-(methylsulfonyl) pyridine, 2,3,5,6-tetrachloro-4-(methylsulfinyl) pyridine and pentachloropyridine	For use as preservative only.
Chlorinated rubber polymer (natural rubber polymer containing approximately 67 percent chlorine)
1-(3-Chloroallyl)-3,5,7-triaza-1-azoniaadamantane chloride	For use as preservative only.
Chlorobenzene
4-Chloro-3,5-dimethylphenol (p-chloro-m-xylenol)	For use as preservative only.
4-Chloro-3-methylphenol	Do.
5-Chloro-2-methyl-4-isothiazolin-3-one (CAS Reg. No. 26172-55-4) and 2-methyl-4-isothiazolin-3-one (CAS Reg. No. 2682-20-4) mixture at a ratio of 3 parts to 1 part, manufactured from methyl-3-mercaptopropionate (CAS Reg. No. 2935-90-2). The mixture may contain magnesium nitrate (CAS Reg. No. 10377-60-3) at a concentration equivalent to the isothiazolone active ingredients (weight/weight)	For use only as an antimicrobial agent in polymer latex emulsions.
Chloroform
Chloroprene
Chromium caseinate
Chromium nitrate
Chromium potassium sulfate
Cobaltous acetate
Coconut fatty acid amine salt of tetrachlorophenol	For use as preservative only.
Copal
Copper 8-quinolinolate	For use as preservative only.
Coumarone-indene resin
Cresyl diphenyl phosphate
Cumene hydroperoxide
Cyanoguanidine
Cyclized rubber as identified in § 176.170(b)(2) of this chapter
Cyclohexane
1,4-Cyclohexanedimethanoldibenzoate (CAS Reg. No. 35541-81-2)
Cyclohexanol
Cyclohexanone resin
Cyclohexanone-formaldehyde condensate
N-Cyclohexyl p-toluene sulfonamide
([ETA]5-Cyclopentadienyl)-([ETA]6-isopropylbenzene)iron(II) hexafluorophosphate (CAS Reg. No. 32760-80-8)	For use only as a photoinitiator.
Damar
Defoaming agents as described in § 176.210 of this chapter
Dehydroacetic acid
Diacetone alcohol
Diacetyl peroxide
N,N'-Dialkoyl-4,4'-diaminodiphenylmethane mixtures where; the alkoyl groups are derived from marine fatty acids (C12-C24)
2,5-Di-tert-amylhydroquinone
Diamines derived from dimerized vegetable oil acids
Diaryl-p-phenylenediamine, where the aryl group may be phenyl, tolyl, or xylyl
1,2-Dibromo-2,4-dicyanobutane (CAS Registry No. 3569-65-7)	For use as a preservative only.
2,2-Dibromo-3-nitrilopropionamide (CAS Reg. No. 10222-01-2).	For use as a preservative only.
2,5-Di-tert-butylhydroquinone
Dibutyl maleate
2,6-Di-tert-butyl-4-methylphenol	For use as preservative only.
Di(C7, C9-alkyl)adipate
Dibutyl sebacate
Dibutyltin dilaurate for use only as a catalyst for polyurethane resins
1,2-Dichloroethylene (mixed isomers)
Dicumyl peroxide
Dicyclohexyl phthalate
Diethanolamine
Diethanolamine condensed with animal or vegetable fatty acids
Diethylamine
Diethylene glycol
Diethylene glycol adipic acid copolymer
Diethylene glycol dibenzoate
Diethylene glycol hydrogenated tallowate monoester
Diethylene glycol laurate
Diethylene glycol monobutyl ether
Diethylene glycol monobutyl ether acetate
Diethylene glycol monoethyl ether
Diethylene glycol monoethyl ether acetate
Diethylene glycol monomethyl ether
Diethylene glycol monooleate
Diethylene glycol monophenyl ether
Diethylene glycol copolymer of adipic acid and phthalic anhydride
Di(2-ethylhexyl) adipate
Di(2-ethylhexyl)phthalate
Diethyl oxalate
Di(2-hydroxy-5-tert-butylphenyl) sulfide
2,2'-Dihydroxy-5,5'-dichlorodiphenylmethane (dichlorophene)
4,5-Dihydroxy-2-imidazolidinone
4-(Diiodomethylsulfonyl) toluene CA Registry No.: 20018-09-01	For use as an antifungal preservative only.
Diisobutyl adipate
Diisobutyl ketone
Diisobutylphenoxyethoxyethyl dimethyl benzyl ammonium chloride
Diisodecyl adipate
Diisodecyl phthalate
Diisopropylbenzene hydroperoxide
N,N-Dimethylcyclohexylamine dibutyldithiocarbamate
Dimethyl formamide
Dimethyl hexynol
2,2-Dimethyl-1,3-propanediol dibenzoate
Dimethyl octynediol
N-(1,1-dimethyl-3-oxobutyl) acrylamide
3,5-Dimethyl-1,3,5,2H-tetrahydrothiadiazine-2-thione	For use as preservative only.
Di-[BETA]-naphthyl-p-phenylenediamine
4,6-Dinonyl-o-cresol
Dinonylphenol
Di-n-octyldecyl adipate
Dioctyldiphenylamine
Dioctylsebacate
Dioxane
Dipentaerythritol pentastearate
Dipentamethylene-thiuram-tetrasulfide
Dipentene
Dipentene resins
Dipentene-beta-pinene-styrene resins
Dipentene-styrene resin (CAS Registry No. 64536-06-7)
Diphenyl-2-ethylhexyl phosphate
Diphenyl, hydrogen ated
N,N'-Diphenyl-p-phenylenediamine
1,3-Diphenyl-2-thiourea
Dipropylene glycol
Dipropylene glycol dibenzoate
Dipropylene glycol monomethyl ether
Dipropylene glycol copolymer of adipic acid and phthalic anhydride
Disodium cyanodithioimidocarbonate
Disodium 4-isodecyl sulfosuccinate (CAS Reg. No. 37294-49-8)
N,N'-Distearoylethylenediamine
Distearyl thiodipropionate
3,5-Di-tert-butyl-4-hydroxyhydrocinnamic acid triester with 1,3,5-tris(2-hydroxyethyl)-s-triazine-2,4,6(1H, 3H, 5H)-trione	For use as antioxidant only.
4,4'-Dithiodimorpholine
n-Dodecylmercaptan
tert-Dodecylmercaptan
Dodecylphenoxybenzene-disulfonic acid and/or its calcium, magnesium, and sodium salts
Elemi gum
Epichlorohydrin-4,4'-isopropylidenediphenol resin
Epichlorohydrin-4,4'-sec-butylidenediphenol resin
Epichlorohydrin-4,4'-isopropylidene-di-o-cresol resin
Epichlorohydrin-phenolformaldehyde resin
Erucamide (erucylamide)
Ethanolamine
Ethoxylated primary linear alcohols of greater than 10 percent ethylene oxide by weight having molecular weights of 390 to 7,000 (CAS Reg. No. 97953-22-5)
Ethoxypropanol butyl ether
Ethyl alcohol (ethanol)
5-Ethyl-1,3-diglycidyl-5-methylhydantoin (CAS Reg. No. 15336-82-0)
Ethylene-acrylic acid-carbon monoxide copolymer (CAS Reg. No. 97756-27-9)
Ethylene-acrylic acid copolymer, partial sodium salt containing no more than 20 percent acrylic acid by weight, and no more than 16 percent of the acrylic acid as the sodium salt (CAS Reg. No. 25750-82-7)
Ethylenediamine
Ethylenediaminetetra-acetic acid, calcium, ferric, potassium, or sodium salts, single or mixed
Ethylene dichloride
Ethylene glycol
Ethylene glycol monobutyl ether
Ethylene glycol monobutyl ether acetate
Ethylene glycol monoethyl ether
Ethylene glycol monoethyl ether acetate
Ethylene glycol monoethyl ether ricinoleate
Ethylene glycol monomethyl ether
Ethylene glycol monophenyl ether
Ethylene-carbon monoxide copolymer (CAS Reg. No. 25052-62-4) containing not more than 30 weight percent of the units derived from carbon monoxide
Ethylene-maleic anhydride copolymer, ammonium or potassium salt
Ethylene-methacrylic acid copolymer partial salts: Ammonium, calcium, magnesium, sodium, and/or zinc
Ethylene-methacrylic acid-vinyl acetate copolymer partial salts: Ammonium, calcium, magnesium, sodium, and/or zinc
Ethylene-octene-1 copolymers containing not less than 70 weight percent ethylene (CAS Reg. No. 26221-73-8)
Ethylene-propylene-dicyclopentadiene copolymer rubber
Ethylene, propylene, 1,4-hexadiene and 2,5-norbornadiene tetrapolymer
Ethylene-vinyl acetate carbon monoxide terpolymer (CAS Registry No. 26337-35-9) containing not more than 15 weight percent of units derived from carbon monoxide
2,2'-Ethylidenebis (4,6-di-tert-butylphenol) (CAS Reg. No. 35958-30-6)
Ethyl-p-hydroxybenzoate	For use as preservative only.
Ethyl hydroxyethylcellulose
Ethyl lactate
2,2'-Ethylidenebis(4,6-di-tert-butylphenyl)fluorophosphonite (CAS Reg. No. 118337-09-0)	For use as an antioxidant and/or stabilizer only.
Ethyl-p-toluene sulfonamide
Fats and oils derived from animal or vegetable sources, and the hydrogenated, sulfated, or sulfonated forms of such fats and oils
Fatty acids derived from animal or vegetable fats and oils; and salts of such acids, single or mixed, as follows:
Aluminum
Ammonium
Calcium
Magnesium
Potassium
Sodium
Zinc
Ferric chloride
Fluosilicic acid (hydrofluosilicic acid)	For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesive.
Formaldehyde
Formaldehyde o- and p-toluene sulfonamide
Formamide
Fumaratochromium (III) nitrate
Furfural
Furfuryl alcohol
Fumaric acid
gamma-Aminopropyltrimethoxysilane (CAS Reg. No. 13822-56-5)
Glutaraldehyde
Glycerides, di- and monoesters
Glycerol polyoxypropylene triol, minimum average molecular weight 250 (CAS Reg. No. 25791-96-2)	For use only in the preparation of polyester and polyurethane resins in adhesives.
Glyceryl borate (glycol boriborate resin)
Glyceryl ester of damar, copal, elemi, and sandarac
Glyceryl monobutyl ricinoleate
Glyceryl monohydroxy stearate
Glyceryl monohydroxy tallowate
Glyceryl polyoxypropylene triol (average molecular weight 1,000)
Glyceryl tribenzoate
Glycol diacetate
Glyoxal
Heptane
Hexamethylenetetramine
Hexane
Hexanetriols
Hexylene glycol
Hydroabietyl alcohol
Hydrocarbon resins (produced by polymerization of mixtures of mono- and di-unsaturated hydrocarbons of the aliphatic, alicyclic, and monobenzenoid type derived both from cracked petroleum and terpene stocks) (CAS Reg. No. 68239-99-6)
Hydrocarbon resins (produced by the polymerization of styrene and alpha-methyl styrene), hydrogenated (CAS Reg. No. 68441-37-2)
Hydrofluoric acid	For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesive.
Hydrogen peroxide
Hydrogenated dipentene resin (CAS Reg. No. 106168-39-2)
Hydrogenated dipentene-styrene copolymer resin (CAS Reg. No. 106168-36-9)
Hydrogenated-beta-pinene-alpha-pinene-dipentene copolymer resin (CAS Reg. No. 106168-37-0)
a-Hydro-omega-hydroxypoly-(oxytetramethylene)	For use only in the preparation of polyurethane resins.
Hydroquinone
Hydroquinone monobenzyl ether
Hydroquinone monoethyl ether
2(2'-Hydroxy-3',5' di-tert-amylphenyl) benzotriazole
Hydroxyacetic acid
7-Hydroxycoumarin
Hydroxyethylcellulose
2-Hydroxy-1-[4-(2-hydroxyethoxy)phenyl]-2-methyl-1-propanone(CAS Reg. No. 106797-53-9)	For use only as a photoinitiator at a level not to exceed 5 percent by weight of the adhesive.
1-(2-Hydroxyethyl)-1-(4-chlorobutyl)-2 alkyl (C6-C17) imidazolinium chloride
Hydroxyethyldiethylenetriamine
[BETA]-Hydroxyethyl pyridinium 2-mercaptobenzothiazol
Hydroxyethyl starch
Hydroxyethylurea
Hydroxylamine sulfate
5-Hydroxymethoxymethyl-1-aza-3,7-dioxabicyclo[3.3.0]octane, 5-hydroxymethyl-1-aza-3,7-dioxabicyclo[3.3.0]octane, and 5-hydroxypoly-[methyleneoxy]methyl-1-aza-3,7-dioxabicyclo[3.3.0] octane mixture	For use only as an antibacterial preservative.
Hydroxypropyl methylcellulose
2-(Hydroxymethyl)-2-methyl-1,3-propanediol tribenzoate
2-Imidazolidinone
3-Iodo-2-propynyl-N-butyl carbamate (CAS Reg. No. 55406-53-6)	For use only as an antifungal preservative.
Iodoform	For use only as polymerization-control agent.
Isoascorbic acid
Isobutyl alcohol (isobutanol)
Isobutylene-isoprene copolymer
Isodecyl benzoate (CAS Reg. No. 131298-44-7)
Isophorone
Isopropanolamine (mono-, di-, tri-)
Isopropyl acetate
Isopropyl alcohol (isopropanol)
Isopropyl-m- and p-cresol (thymol derived)
4,4'-Isopropylidenediphenol
4,4'-Isopropylidenediphenol, polybutylated mixture	For use as preservative only.
Isopropyl peroxydicarbonate
p-Isopropoxy diphenylamine
4,4'-Isopropylidene-bis(p-phenyleneoxy)-di-2-propanol
Itaconic acid
Japan wax
Kerosene
Lauroyl peroxide
Lauroyl sulfate salts:
Ammonium
Magnesium
Potassium
Sodium
Lauryl alcohol
Lauryl pyridinium 5-chloro-2-mercaptobenzothiazole
Lignin calcium sulfonate
Lignin sodium sulfonate
Linoleamide (linoleic acid amide)
Magnesium fluoride	For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride from all sources not to exceed 1 percent by weight of the finished adhesives.
Magnesium glycerophosphate
Maleic acid
Maleic anhydride-diisobutylene copolymer, ammonium or sodium salt
Manganese acetate
Marine oil fatty acid soaps, hydrogenated
Melamine
Melamine-formaldehyde copolymer
2-Mercaptobenzothiazole
2-Mercaptobenzothiazole and dimethyl dithiocarbamic acid mixture, sodium salt	For use as preservative only.
2-Mercaptobenzothiazole, sodium or zinc salt	For use as preservative only.
Methacrylate-chromic chloride complex, ethyl or methyl ester
p-Menthane hydroperoxide
Methyl acetate
Methyl acetyl ricinoleate
Methyl alcohol (methanol)
Methylcellulose
Methylene chloride
4,4'-Methylenebis(2,6-di-tert-butylphenol)
2,2-Methylenebis (4-ethyl-6-tert-butylphenol)
2,2-Methylenebis (4-methyl-6-nonylphenol)
2,2-Methylenebis (4-methyl-6-tert-butylphenol)
Methyl ethyl ketone
Methyl ethyl ketone-formaldehyde condensate
2-Methylhexane
1-Methyl-2-hydroxy-4-isopropyl benzene
Methyl isobutyl ketone
Methyl oleate
Methyl oleate-palmitate mixture
Methyl ricinoleate
Methyl salicylate
a-Methylstyrene-vinyltoluene copolymer resins (molar ratio 1 a methylstyrene to 3 vinyltoluene)
Methyl tallowate
Mineral oil
Monochloracetic acid
Monooctyldiphenylamine
Montan wax
Morpholine
Myristic acid-chromic chloride complex
Myristyl alcohol
Naphtha
Naphthalene, monosulfonated
Naphthalene sulfonic acid-formaldehyde condensate, sodium salt
[ALPHA]-Naphthylamine
[ALPHA],[ALPHA]',[ALPHA]",[ALPHA]"'-Neopentane tetrayltetrakis [omega-hydroxypoly (oxypropylene) (1-2 moles)], average molecular weight 400
Nitric acid
[MICRO]-Nitrobiphenyl
Nitrocellulose
2-Nitropropane
[ALPHA]-(p-Nonylphenyl)-omega-hydroxypoly (oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters; the nonyl group is a propylene trimer isomer and the poly (oxyethylene) content averages 6-9 moles or 50 moles
[ALPHA](p-Nonylphenyl)-omega-hydroxypoly (oxyethylene) produced by the condensation of 1 mole of p-nonylphenol (nonyl group is a propylene trimer isomer) with an average of 1-40 moles of ethylene oxide
[ALPHA]-(p-Nonylphenyl)-omega-hydroxypoly (oxyethylene) sulfate, ammonium salt: the nonyl group is a propylene trimer isomer and the poly (oxyethylene) content averages 9 or 30 moles
endo-cis-5-Norbornene-2,3-dicarboxylic anhydride
[ALPHA]-cis-9-Octadecenyl-omega-hydroxypoly (oxyethylene); the octadecenyl group is derived from oleyl alcohol and the poly (oxyethylene) content averages 20 moles
Octadecyl 3,5-di-tert-butyl-4-hydroxyhydrocinnamate
Octyl alcohol
Octylphenol
Octylphenoxyethanols
Octylphenoxypolyethoxy-polypropoxyethanol (13 moles of ethylene oxide and propylene oxide)
Odorless light petroleum hydrocarbons
Oleamide (oleic acid amide)
Oleic acid, sulfated
2,2'-Oxamidobis[ethyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS Reg. No. 70331-94-1)
Oxazoline
[ALPHA]-(oxiranylmethyl)-[OMEGA]-(oxiranylmethoxy)poly[oxy(methyl-1,2-ethanediyl)], (alternative name: epichlorohydrin-polypropylene glycol) (CAS Reg. No. 26142-30-3)	For use as a reactant in the preparation of epoxy-based resins.
2,2'-[oxybis[(methyl-2,1-ethanediyl)-oxymethylene]]bisoxirane, (alternative name: epichlorohydrin-dipropylene glycol) (CAS Reg. No. 41638-13-5)	For use as a reactant in the preparation of epoxy-based resins.
n-Oxydiethylene-benzothiazole
Palmitamide (palmitic acid amide)
Paraffin (C12-C20) sulfonate
Paraformaldehyde
Pentachlorophenol
Pentaerythritol ester of maleic anhydride
Pentaerythritol monostearate	For use as preservative only.
Pentaerythritol tetrabenzoate [CAS Registry No. 4196-86-5]
Pentaerythritol tetrastearate
2,4-Pentanedione
Pentasodium diethylenetriaminepentaacetate (CAS Reg. No. 140-01-2)
Perchloroethylene
Petrolatum
Petroleum hydrocarbon resin (cyclopentadiene type), hydrogenated
Petroleum hydrocarbon resin (produced by the catalytic polymerization and subsequent hydrogenation of styrene, vinyltoluene, and indene types from distillates of cracked petroleum stocks)
Petroleum hydrocarbon resins (produced by the homo-and copolymerization of dienes and olefins of the aliphatic, alicyclic, and monobenzenoid arylalkene types from distillates of cracked petroleum stocks)
Phenol	For use as preservative only.
Phenol-coumarone-indene resin
Phenolic resins as described in § 175.300(b)(3)(vi)
Phenothiazine	For use only as polymerization-control agent.
Phenyl-[BETA]-naphthylamine (free of [BETA]-naphthylamine)
o-Phenylphenol	For use as preservative only.
o-Phthalic acid
Pimaric acid
Pine oil
Piperazine
Piperidinium pentamethylenedithiocarbamate
Poly(acrylamide-[2-acrylamide-2-methylpropylsulfonate]-dimethylidiallyl ammonium chloride) sodium salt (CAS Reg. No. 72275-68-4)
Polyamides derived from reaction of one or more of the following acids with one or more of the following amines:
Acids:
Azelaic acid
Dimerized vegetable oil acids
Amines:
Bis(hexamethylene) triamine and higher homologues
Diethylenetriamine
Diphenylamine
Ethylenediamine
Hexamethylenediamine
Poly(oxypropylene)diamine (weight average molecular weight 2010) (CAS Reg. No. 9046-10-0)
Poly(oxypropylene)diamine (weight average molecular weight 440) (CAS Reg. No. 9046-10-0)
Tetraethylenepentamine
Triethylenetetramine
Polybutene, hydrogenated
Polybutylene glycol (molecular weight 1,000)
Poly [2(diethylamino) ethyl methacrylate] phosphate
Polyester of adipic acid, phthalic acid, and propylene glycol, terminated with butyl alcohol
Polyester of diglycolic acid and propylene glycol containing ethylene glycol monobutyl ether as a chain stopper
Polyester resins (including alkyd type), as the basic polymer, formed as esters when one or more of the following acids are made to react with one or more of the following alcohols:
Acids:
Azelaic acid
Dimethyl 1,4-cyclohexanedicarboxylate (CAS Reg. No. 94-60-0)
Dimethyl-5-sulfoisophthalic acid (CAS Reg. No. 50975-82-1) and/or its sodium salt (CAS Reg. No. 3965-55-7)
Polybasic and monobasic acids identified in § 175.300(b)(3)(vii) (a) and (b)
5-sulfo-1,3-benzenedicarboxylic acid, monosodium salt (CAS Reg. No. 6362-79-4)
Tetrahydrophthalic acid
Alcohols:
1,4-Cyclohexanedimethanol
2,2-Dimethyl-1,3-propanediol
1,6-Hexanediol (CAS Reg. No. 629-11-8)
Polyhydric and monohydric alcohols identified in § 175.300(b)(3)(vii) (c) and (d)
Polyethyleneadipate modified with ethanolamine with the molar ratio of the amine to the adipic acid less than 0.1 to 1	For use only in the preparation of polyurethan resins.
Polyethylene glycol (molecular weight 200-6,000)
Polyethylene glycol mono-isotridecyl ether sulfate, sodium salt (CAS Reg. No. 150413-26-6)
Polyethyleneglycol alkyl(C10-C12)ether sulfosuccinate, disodium salt (CAS Reg. No. 68954-91-6)
Polyethylene, oxidized
Polyethylene resins, carboxyl modified, identified in § 177.1600 of this chapter
Polyethylenimine
Polyethylenimine-epichlorohydrin resins
Poly(ethyloxazoline) (CAS Reg. No. 25805-17-8)
Polyisoprene
Polymeric esters of polyhydric alcohols and polycarboxylic acids prepared from glycerin and phthalic anhydride and modified with benzoic acid, castor oil, coconut oil, linseed oil, rosin, soybean oil, styrene, and vinyl toluene
Polymers: Homopolymers and copolymers of the following monomers:
Acrylamide
Acrylic acid
Acrylonitrile
Allylmethacrylate (CAS Reg. No. 00096-05-09)
Butadiene
Butene
N-tert-Butylacrylamide
Butyl acrylate
1,3-Butylene glycol dimethacrylate
Butyl methacrylate
Crotonic acid
Decyl acrylate
Diallyl fumarate
Diallyl maleate
Diallyl phthalate
Dibutyl fumarate
Dibutyl itaconate
Dibutyl maleate
Di(2-ethylhexyl) maleate
Dimethyl-[ALPHA]-methylstyrene
Dioctyl fumarate
Dioctyl maleate
Divinylbenzene
Ethyl acrylate
Ethylene
Ethylene cyanohydrin
2-Ethylhexyl acrylate
Ethyl methacrylate
Fatty acids, C10-13-branched, vinyl esters (CAS Reg. No. 184785-38-4)
Fumaric acid and/or its methyl, ethyl, propyl, butyl, amyl hexyl, heptyl and octyl esters
Glycidyl methacrylate
1-Hexene (CAS Reg. No. 592-41-6)
2-Hydroxyethyl acrylate
2-Hydroxyethyl methacrylate
2-Hydroxypropyl methacrylate
Isobutyl acrylate
Isobutylene
Itaconic acid
Maleic acid, diester with 2-hydroxyethanesulfonic acid, sodium salt
Maleic anhydride
Methacrylic acid
Methyl acrylate
N,N'-Methylenebisacrylamide
Methyl methacrylate
N-Methylolacrylamide
Methyl styrene
-Methyl styrene
Monoethyl maleate
Monomethyl maleate
Mono (2-ethylhexyl) maleate
5-Norbornene-2 3-dicarboxylic acid, mono-n-butyl ester
1-Octene (CAS Reg. No. 111-66-0)
Propyl acrylate
Propylene
Styrene
Triallyl cyanurate
Vinyl acetate
Vinyl alcohol (from alcoholysis or hydrolysis of vinyl acetate units)
Vinyl butyrate
Vinyl chloride
Vinyl crotonate
Vinyl ethyl ether
Vinyl hexoate
Vinylidene chloride
Vinyl methyl ether
Vinyl pelargonate
Vinyl propionate
Vinyl pyrrolidone
Vinyl stearate
Polyoxyalkylated-phenolic resin (phenolic resin obtained from formaldehyde plus butyl- and/or amylphenols, oxyalkylated with ethylene oxide and/or propylene oxide)
Poly(oxycaproyl) diols and triols (minimum molecular weight 500)
Polyoxyethylated (40 moles) tallow alcohol sulfate, sodium salt
Polyoxyethylene (20 mol)-anhydrous lanolin adduct
Polyoxyethylene (molecular weight 200) dibenzoate
Polyoxyethylene (molecular weight 200-600) esters of fatty acids derived from animal or vegetable fats and oils (including tall oil)
Polyoxyethylene (15 moles) ester of rosin
Polyoxyethylene (4-5 moles) ether of phenol
Polyoxyethylene (25 moles)-glycerol adduct
Polyoxyethylene (40 moles) stearate
Polyoxyethylene (5-15 moles) tridecyl alcohol
Polyoxypropylene (3 moles) tridecyl alcohol sulfate
Polyoxypropylene (20 moles) butyl ether
Polyoxypropylene (40 moles) butyl ether
Polyoxypropylene (20 moles) oleate butyl ether
Polyoxypropylene-polyoxyethylene condensate (minimum molecular weight 1,900)
Polypropylene glycol (minimum molecular weight 150)
Polypropylene glycol (3-4 moles) triether with 2-ethyl-2-(hydroxymethyl)-1,3-propane-diol, average molecular weight 730
Polypropylene glycol dibenzoate (CAS Reg. No. 72245-46-6)	For use as a plasticizer at levels not to exceed 20 percent by weight of the finished adhesive.
Polypropylene, noncrystalline
Polysiloxanes:
Diethyl polysiloxane
Dihydrogen polysiloxane
Dimethyl polysiloxane
Diphenyl polysiloxane
Ethyl hydrogen polysiloxane
Ethyl phenyl polysiloxane
Methyl ethyl polysiloxane
Methyl hydrogen polysiloxane
Methyl phenyl polysiloxane
Phenyl hydrogen polysiloxane
Polysorbate 60
Polysorbate 80
Polysorbate 20 (polyoxyethylene (20) sorbitan monolaurate)
Polysorbate 40 (polyoxyethylene (20) sorbitan monopalmitate)
Poly[styrene-co-disodium maleate-co-[ALPHA]-(p-nonyl-phenyl)-omega-(p-vinyl-benzyl)poly(oxyethylene)] terpolymer
Polytetrafluoroethylene.
Polyurethane resins produced by: (1) reacting diisocyanates with one or more of the polyols or polyesters named in this paragraph, or (2) reacting the chloroformate derivatives of one or more of the polyols or polyesters named in this paragraph with one or more of the polyamines named in this paragraph, or (3) reacting toluene diisocyanate or 4,4' methylenebis(cyclohexylisocyanate) (CAS Reg. No. 5124-30-1) with: (i) one or more of the polyols or polyesters named in this paragraph and with either N-methyldiethanolamine (CAS Reg. No. 105-59-9) and dimethyl sulfate (CAS Reg. No. 77-78-1) or dimethylolpropionic acid (CAS Reg. No. 4767-03-7) and triethylamine (CAS Reg. No. 121-44-8), or (ii) a fumaric acid-modified polypropylene glycol or fumaric acid-modified tripropylene glycol), triethylamine (CAS Reg. No. 107-15-3), and ethylenediamine (CAS Reg. No. 121-44-8), or (4) reacting meta-tetramethylxylene diisocyanate (CAS Reg. No. 2778-42-9) with one or more of the polyols and polyesters listed in this paragraph and with dimethylolpropionic acid (CAS Reg. No. 4767-03-7) and triethylamine (CAS Reg. No. 121-44-8), N-methyldiethanolamine (CAS Reg. No. 105-59-9), 2-dimethylaminoethanol (CAS Reg. No. 108-01-0), 2-dimethylamino-2-methyl-1-propanol (CAS Reg. No. 7005-47-2), and/or 2-amino-2-methyl-1-propanol (CAS Reg. No. 124-68-5)
Polyvinyl alcohol modified so as to contain not more than 3 weight percent of comonomer units derived from 1-alkenes having 12 to 20 carbon atoms
Polyvinyl butyral
Polyvinyl formal
Potassium ferricyanide	For use only as polymerization-control agent.
Potassium N-methyldithiocarbamate
Potassium pentachlorophenate	For use as preservative only.
Potassium permanganate
Potassium persulfate
Potassium phosphates (mono-, di-, tribasic)
Potassium tripolyphosphate
[ALPHA], [ALPHA]', [ALPHA]"-1,2,3-Propanetriyltris [omega-(2,3-epoxypropoxy) poly (oxypropylene) (24 moles)]
[BETA]-Propiolactone
Propyl alcohol (propanol)
Propylene carbonate
Propylene glycol and p-p'-isopropylidenediphenol diether
Propylene glycol dibenzoate (CAS Reg. No. 19224-26-1)	For use as a plasticizer at levels not to exceed 20 percent by weight of the finished adhesive.
Propylene glycol esters of coconut fatty acids
Propylene glycol monolaurate
Propylene glycol monomethyl ether
Propylene glycol monostearate
[ALPHA], [ALPHA]', [ALPHA]"-[Propylidynetris (methylene)] tris [omega-hydroxypoly (oxypropylene) (1.5 moles minimum)], minimum molecular weight 400
Quaternary ammonium chloride (hexadecyl, octadecyl derivative)	For use as preservative only.
Rosin (wood, gum, and tall oil rosin), rosin dimers, decarboxylated rosin (including rosin oil, disproportionated rosin, and these substances as modified by one or more of the following reactants:
Alkyl (C1-C9) phenolformaldehyde
Ammonia
Ammonium caseinate-p-Cyclohexylphenolformaldehyde
Diethylene glycol
Dipentaerythritol
Ethylene glycol
Formaldehyde
Fumaric acid
Glycerin
Hydrogen
Isophthalic acid
4,4'-Isopropylidenediphenol-epichlorohydrin (epoxy)
4,4'-Isopropylidenediphenol-formaldehyde
Maleic anhydride
Methyl alcohol
Pentaerythritol
Phthalic anhydride
Polyethylene glycol
Phenol-formaldehyde
Phenyl [MICRO]-cresol-formaldehyde
p-Phenylphenol-formaldehyde
Sulfuric acid
Triethylene glycol
Xylenol-formaldehyde
Rosin salts (salts of wood, gum, and tall oil rosin, and the dimers thereof, decarboxylated rosin disproportionated rosin, hydrogenated rosin):
Aluminum
Ammonium
Calcium
Magnesium
Potassium
Sodium
Zinc
Rosin, gasoline-insoluble fraction
Rubber hydrochloride polymer
Rubber latex, natural
Salicylic acid	For use as preservative only.
Sandarac
Sebacic acid
Shellac
Silicon dioxide as defined in § 172.480(a) of this chapter
Sodium alkyl (C2-C13.5 aliphatic) benezenesulfonate
Sodium aluminum pyrophosphate
Sodium aluminum sulfate
Sodium bisulfate
Sodium calcium silicate
Sodium capryl polyphosphate
Sodium carboxymethylcellulose
Sodium chlorate
Sodium chlorite
Sodium chromate
Sodium decylsulfate
Sodium dehydroacetate	For use as preservative only.
Sodium di-(2-ethylhexoate)
Sodium di-(2-ethylhexyl) pyrophosphate
Sodium dihexylsulfosuccinate
Sodium dissobutylphenoxydiethoxyethyl sulfonate
Sodium diisobutylphenoxymonoethoxyethyl sulfonate
Sodium diisopropyl- and triisopropylnaphthalenesulfonate
Sodium dimethyldithiocarbamate
Sodium dioctylsulfosuccinate
Sodium n-dodecylpolyethoxy (50 moles) sulfate
Sodium ethylene ether of nonylphenol sulfate
Sodium 2-ethylhexyl sulfate
Sodium fluoride	For use only as bonding agent for aluminum foil, stabilizer, or preservative. Total fluoride for all sources not to exceed 1 percent by weight of the finished adhesive.
Sodium formaldehyde sulfoxylate
Sodium formate
Sodium heptadecylsulfate
Sodium hypochlorite
Sodium isododecylphenoxypolyethoxy (40 moles) sulfate
Sodium N-lauroyl sarcosinate
Sodium metaborate
Sodium [ALPHA]-naphthalene sulfonate
Sodium nitrate
Sodium nitrite
Sodium oleoyl isopropanolamide sulfosuccinate
Sodium pentachlorophenate	For use as preservative only.
Sodium perborate
Sodium persulfate
Sodium [MICRO]-phenylphenate	For use as preservative only.
Sodium polyacrylate
Sodium polymethacrylate
Sodium polystyrene sulfonate
Sodium salicylate	For use as preservative only.
Sodium salt of 1-hydroxy 2(1H)-pyridine thione	Do.
Sodium tetradecylsulfate
Sodium thiocyanate
Sodium bis-tridecylsulfosuccinate
Sodium xylene sulfonate
Sorbitan monooleate
Sorbitan monostearate
Soybean oil, epoxidized
Spermaceti wax
Sperm oil wax
Stannous 2-ethylhexanoate	For use only as a catalyst for polyurethane resins.
Stannous stearate
Starch hydrolysates
Starch or starch modified by one or more of the treatments described in §§ 172.892 and 178.3520 of this chapter
Starch, reacted with a urea-formaldehyde resin
Starch, reacted with formaldehyde
Stearamide (stearic acid amide)
Stearic acid
Stearic acid-chromic chloride complex
Stearyl-cetyl alcohol, technical grade, approximately 65 percent-80 percent stearyl and 20 percent-35 percent cetyl
Strontium salicylate
Styrenated phenol
Styrene block polymers with 1,3-butadiene
Styrene-maleic anhydride copolymer, ammonium or potassium salt
Styrene-maleic anhydride copolymer (partially methylated) sodium salt
Styrene-methacrylic acid copolymer, potassium salt
Sucrose acetate isobutyrate
Sucrose benzoate
Sucrose octaacetate
2-sulfoethyl methacrylate (CAS Registry No. 10595-80-9)	For use at levels not to exceed 2 percent by weight of the dry adhesive.
[ALPHA]-Sulfo-omega-(dodecyloxy)poly (oxyethylene), ammonium salt
Sulfonated octadecylene (sodium form)
Sulfosuccinic acid 4-ester with polyethylene glycol dodecyl ether disodium salt (alcohol moiety produced by condensation of 1 mole of n-dodecyl alcohol and an average of 5-6 moles of ethylene oxide, Chemical Abstracts Service Registry No. 039354-45-5)
Sulfosuccinic acid 4-ester with polyethylene glycol nonylphenyl ether, disodium salt (alcohol moiety produced by condensation of 1 mole of nonylphenol and an average of 9-10 moles of ethylene oxide) (CAS Reg. No. 9040-38-4)
Sulfur
Synthetic primary linear aliphatic alcohols whose weight average molecular weight is greater than 400 (CAS Reg. No. 71750-71-5)
Synthetic wax polymer as described in § 176.170(a)(5) of this chapter
Tall oil
Tall oil fatty acids, linoleic and oleic
Tall oil fatty acid methyl ester
Tall oil, methyl ester
Tall oil pitch
Tall oil soaps
Tallow alcohol (hydrogenated)
Tallow amine, secondary (hexadecyl, octadecyl), of hard tallow
Tallow, blown (oxidized)
Tallow, propylene glycol ester
Terpene resins ([ALPHA]-and [BETA]-pinene) homopolymers, copolymers, and condensates with phenol, formaldehyde, coumarone, and/or indene
Terphenyl
Terphenyl, hydrogenated
Terpineol
Tetraethylene pentamine
Tetraethylthiuram disulfide
Tetrahydrofuran
Tetrahydrofurfuryl alcohol
Tetra-isopropyl titanate
Tetrakis[methylene (3,5-di-tert-butyl-4-hydroxy-hydro-cinnamate)] methane
A[p-(1,1,3,3-Tetramethylbutyl) phenyl]-omega-hydroxypoly-(oxyethylene) produced by the condensation of 1 mole of p-(1,1,3,3-tetramethylbutyl) phenol with an average of 1-40 moles of ethylene oxide
A-[p-(1,1,3,3-Tetramethylbutyl) phenyl]-omega-hydroxy-poly(oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and their sodium, potassium, and ammonium salts having a poly(oxyethylene) content averaging 6-9 or 40 moles
Tetramethyl decanediol
Tetramethyl decynediol
Tetramethyl decynediol plus 1-30 moles of ethylene oxide
Tetramethylthiuram monosulfide
Tetrasodium N-(1,2-dicarboxyethyl)N-octadecylsulfosuccinamate
4,4'-Thiobis-6-tert-butyl-m-cresol
Thiodiethylene-bis(3,5-di-tert-butyl-4-hydroxyhydrocinnamate)
2,2'-(2,5-Thiophenediyl) bis[5-tert-butylbenzoxazole]
Thiram
Thymol	For use as preservative only.
Titanium dioxide
Titanium dioxide-barium sulfate
Titanium dioxide-calcium sulfate
Titanium dioxide-magnesium silicate
Toluene
Toluene 2,4-diisocyanate
Toluene 2,6-diisocyanate
o- and p-Toluene ethyl sulfonamide
o- and p-Toluene sulfonamide
p-Toluene sulfonic acid
p-(p'-Toluene-sulfonylamide)-diphenylamide
Triazine-formaldehyde resins as described in § 175.300(b)(3) (xiii)
Tributoxyethyl phosphate
Tributylcitrate
Tri-tert-butyl-p-phenyl phenol	For use as preservative only.
Tributyl phosphate
Tributyltin chloride complex of ethylene oxide condensate of dehydroabietylamine	For use as preservative only.
Tri-n-butyltin acetate	For use as preservative only.
Tri-n-butyltin neodecanoate	Do.
1,1,1-Trichloroethane
1,1,2-Trichloroethane
Trichloroethylene
Tri-[BETA]-chloroethylphosphate
Tridecyl alcohol
Triethanolamine
3-(Triethoxysilyl) propylamine
Triethylene glycol
Triethylene glycol dibenzoate
Triethylene glycol di(2-ethylhexoate)
Triethylene glycol polyester of benzoic acid and phthalic acid
Triethylhexyl phosphate
Triethylphosphate
2,4,5-Trihydroxy butyrophenone
Triisopropanolamine
Trimethylol propane
2,2,4-Trimethylpentanediol-1,3-diisobutyrate
Trimeric aromatic amine resin from diphenylamine and acetone of molecular weight approximately 500
Tri(nonylphenyl) phosphite-formaldehyde resins	As identified in § 177.2600(c)(4)(iii) of this chapter. For use only as a stabilizer.
Triphenylphosphate
Tripropylene glycol monomethyl ether
1,3,5-Tris (3,5-di-tert-butyl-4-hydroxy-benzyl)-triazine-2,4,6 (1H,3H,5H)-trione
Tris (p-tertiary butyl phenyl) phosphate
Tris(2-methyl-4-hydroxy-5-tert-butyl-phenyl)butane
Trisodium N-hydroxyethylethylenediaminetriacetate (CAS Reg. No. 139-89-9)
Turpentine
Urea-formaldehyde resins as described in § 175.300(b)(3)(xii)
Vegetable oil, sulfonated or sulfated, potassium salt
Vinyl acetate-maleic anhydride copolymer, sodium salt
Waxes, petroleum
Wax, petroleum, chlorinated (40% to 70% chlorine)
Waxes, synthetic paraffin (Fischer-Tropsch process)
3-(2-Xenolyl)-1,2-epoxypropane
Xylene
Xylene (or toluene) alkylated with dicyclopentadiene
Zein
Zinc acetate
Zinc ammonium chloride
Zinc dibenzyl dithiocarbamate
Zinc dibutyldithiocarbamate
Zinc diethyldithiocarbamate
Zinc di(2-ethylhexoate)
Zinc formaldehyde sulfoxylate
Zinc naphthenate and dehydroabietylamine mixture
Zinc nitrate
Zinc orthophosphate
Zinc resinate
Zinc sulfide
Zineb (zinc ethylenebis-dithiocarbamate)
Ziram (zinc dimethyldithiocarbamate)

21 C.F.R. §175.105

42 FR 14534, Mar. 15, 1977; 42 FR 56728, Oct. 28, 1977

87 FR 31088, 5/20/2022

For FEDERAL REGISTER citations affecting § 175.105 , see the List of CFR Sections Affected, which appears in the Finding Aids section of the printed volume and at www.govinfo.gov.