Section 102.1 - Definitions(a)Advanced in value. "Advanced in value" means an increase in the value of a good as a result of production with respect to that good, other than by means of those "minor processing" operations described in paragraphs (n)(5), (n)(6), and (n)(7) of this section.(b)Commingled. "Commingled" means physically combined or mixed.(c)Direct physical identification. "Direct physical identification" means identification by visual or other organoleptic examination.(d)Domestic material. "Domestic material" means a material whose country of origin as determined under these rules is the same country as the country in which the good is produced.(e)Foreign material. "Foreign material" means a material whose country of origin as determined under these rules is not the same country as the country in which the good is produced.(f)Fungible goods or fungible materials. "Fungible goods or fungible materials" means goods or materials that are interchangeable for commercial purposes and whose properties are essentially identical.(g)A good wholly obtained or produced. A good "wholly obtained or produced" in a country means: (1) A mineral good extracted in that country;(2) A vegetable or plant good harvested in that country;(3) A live animal born and raised in that country;(4) A good obtained from hunting, trapping or fishing in that country;(5) A good (fish, shellfish and other marine life) taken from the sea by vessels registered or recorded with that country and flying its flag;(6) A good produced on board factory ships from the goods referred to in paragraph (g)(5) of this section, provided such factory ships are registered or recorded with that country and fly its flag;(7) A good taken by that country or a person of that country from the seabed or beneath the seabed outside territorial waters, provided that country has rights to exploit such seabed;(8) A good taken from outer space, provided they are obtained by that country or a person of that country;(9) Waste and scrap derived from:(i) Production in a country, or(ii) Used goods collected in that country provided such goods are fit only for the recovery of raw materials; and(10) A good produced in that country exclusively from goods referred to in paragraphs (g)(1) through (10) of this section or from their derivatives, at any stage of production.(h)Harmonized System. "Harmonized System" means the Harmonized Commodity Description and Coding System, including its general rules of Interpretation, Section Notes and Chapter Notes, as adopted and implemented by the United States.(i)Improved in condition. "Improved in condition" means the enhancement of the physical condition of a good as a result of production with respect to that good, other than by means of those "minor processing" operations described in paragraphs (n)(5), (n)(6), and (n)(7) of this section.(j)Incorporated. "Incorporated" means physically incorporated into a good as a result of production with respect to that good.(k)Indirect materials. "Indirect materials" means a good used in the production, testing or inspection of another good but not physically incorporated into that other good, or a good used in the maintenance of buildings or the operation of equipment associated with the production of that other good, including: (2) Tools, dies and molds;(3) Spare parts and materials used in the maintenance of equipment and buildings;(4) Lubricants, greases, compounding materials and other materials used in production or used to operate equipment and buildings;(5) Gloves, glasses, footwear, clothing, safety equipment and supplies;(6) Equipment, devices, and supplies used for testing or inspecting the goods;(7) Catalysts and solvents; and(8) Any other goods that are not incorporated into the good but whose use in the production of the good can reasonably be demonstrated to be a part of that production.(l)Inventory management method. "Inventory management method" means: (2) "Last-in, first-out;"(3) "First-in, first-out;" or(4) Any other method that is recognized in the Generally Accepted Accounting Principles (GAAP) of the country in which the production is performed or is otherwise accepted by that country.(m)Material. "Material" means a good that is incorporated into another good as a result of production with respect to that other good, and includes parts, ingredients, subassemblies, and components.(n)Minor processing. "Minor processing" means the following: (1) Mere dilution with water or another substance that does not materially alter the characteristics of the good;(2) Cleaning, including removal of rust, grease, paint, or other coatings;(3) Application of preservative or decorative coatings, including lubricants, protective encapsulation, preservative or decorative paint, or metallic coatings;(4) Trimming, filing or cutting off small amounts of excess materials;(5) Unloading, reloading or any other operation necessary to maintain the good in good condition;(6) Putting up in measured doses, packing, repacking, packaging, repackaging;(7) Testing, marking, sorting, or grading;(8) Ornamental or finishing operations incidental to textile good production designed to enhance the marketing appeal or the ease of care of the product, such as dyeing and printing, embroidery and appliques, pleating, hemstitching, stone or acid washing, permanent pressing, or the attachment of accessories notions, findings and trimmings; or(9) Repairs and alterations, washing, laundering, or sterilizing.(o)Production. "Production" means growing, mining, harvesting, fishing, trapping, hunting, manufacturing, processing or assembling a good.(p)Simple assembly. "Simple assembly" means the fitting together of five or fewer parts all of which are foreign (excluding fasteners such as screws, bolts, etc.) by bolting, gluing, soldering, sewing or by other means without more than minor processing.(q)Value. "Value" means, with respect to § 102.13 : (1) In the case of a good under NAFTA, its customs value or transaction value within the meaning of the appendix to part 181 of this chapter; or(2) In the case of a material under NAFTA, its customs value or value within the meaning of the appendix to part 181 of this chapter.(3) In the case of a good or material under the USMCA, its customs value or transaction value within the meaning of appendix A to part 182 of this chapter.T.D. 96-48, 61 FR 28955, June 6, 1996, as amended by CBP Dec. 21-10, 86 FR 35581 , July 6, 2021 As amended at 86 FR 35581, 7/6/2021