Note 1 to paragraph (b)(10): Paragraph (b)(10) applies to exports to Hong Kong, as this destination is considered a part of the People's Republic of China under the EAR, even if the AES requirements state that the destination filed in EEI is to be listed as Hong Kong.
Note 1 to paragraph (c)(1):
See the export clearance requirements for exports of firearms controlled under ECCNs 0A501.a or .b, 0A506, or 0A507, shotguns with a barrel length less than 18 inches controlled under ECCNs 0A502 or 0A508, or ammunition controlled under ECCN 0A505, authorized under License Exception BAG, as set forth in § 740.14 of the EAR.
Note 2 to paragraph (g)(4):
If a commodity described in paragraph (g)(4) of this section is exported under License Exception TMP under § 740.9(a)(6) of the EAR for inspection, test, calibration, or repair is not consumed or destroyed in the normal course of authorized temporary use abroad, the commodity must be disposed of or retained in one of the ways specified in § 740.9(a)(14)(i), (ii), or (iii) of the EAR. For example, if a commodity described in this paragraph (g)(4) was destroyed while being repaired after being exported under § 740.9(a)(6) , the commodity described in this paragraph (g)(4) would not be required to be returned. If the entity doing the repair returned a replacement of the commodity to the exporter from the United States, the import would not require an EAR authorization. The entity that exported the commodity described in this paragraph (g)(4) and the entity that received the commodity would need to document this as part of their recordkeeping related to this export and subsequent import to the United States.
Note 3 to paragraph (h)(1): The Bureau of Census Foreign Trade Regulations impose additional requirements for a power of attorney or other written authorization. See 15 CFR 30.3(f) of the FTR.
15 C.F.R. §758.1