15 C.F.R. § 705 app Supplement No. 2 to Part 705
Current through May 31, 2024
This supplement identifies steel articles that have been approved for import under a General Approved Exclusion (GAE). The Secretary of Commerce, in consultation with the Secretary of Defense, the Secretary of the Treasury, the Secretary of State, the United States Trade Representative, the Assistant to the President for Economic Policy, the Assistant to the President for National Security Affairs, and other senior Executive Branch officials as appropriate, makes these determinations that certain steel articles may be authorized under a GAE consistent with the objectives of the 232 Exclusions Process as outlined in supplement no. 1 to this part. The GAEs described in this supplement may be used by any importer. GAEs do not include quantity limits. Each GAE identifier will be effective fifteen calendar days after publication of a FEDERAL REGISTER notice either adding or revising a specific GAE identifier. There is no retroactive relief for GAEs. Relief is only available to steel articles that are entered for consumption, or withdrawn from warehouse for consumption, on or after the effective date of a GAE included in supplement no. 2 to this part. In order to use a GAE, the importer must include the GAE identifier in the Automated Commercial Environment (ACE) system that corresponds to the steel articles being imported. These GAEs are indefinite in length, but the Department of Commerce on behalf of the Secretary of Commerce may at any time issue a FEDERAL REGISTER notice removing, revising or adding to an existing GAE in this supplement as warranted to align with the objectives of the 232 exclusions process as described in supplement no. 1 to this part. The Department of Commerce on behalf of the Secretary of Commerce may periodically publish notices of inquiry in the FEDERAL REGISTER soliciting public comments on potential removals, revisions or additions to this supplement.
| GAE Identifier | Description of steel that may be imported (at 10-digit harmonized tariff schedule of the United States (HTSUS) statistical reporting number or more narrowly defined at product level) | Other limitations (e.g., country of import or quantity allowed) | Federal Register citation |
| GAE.1.S: 7304592030 | 7304592030. TUBES/PIPES/HLLW PRFLS OTH ALLOY STL, SMLESS, CIRC CS, OTHER THAN COLD-DRAWN/COLD-ROLLED (COLD-REDUCED), SUITABLE FOR BOILERS ETC, HEAT-RESISTING STL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.2.S: 7304592080 | 7304592080. TUBES/PIPES/H PRFLS ALLOY STL, SMLSS, CIRC CS, OTHER THAN COLD-DRAWN/COLD-ROLLED (COLD-REDUCED), SUIT FOR BOILERS ETC, NOT HT-RSST STL, OS DIAMETER [GREATER THAN]406.4MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.4.S: 7222406000 | 7222406000. ANGLES SHAPES AND SECTIONS STAINLESS STEEL, OTHER THAN HOT ROLLED, NOT DRILLED, NOT PUNCHED, AND NOT OTHERWISE ADVANCED | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.5.S: 7306901000 | 7306901000. OTH TUBES/PIPES/HOLLOW PROFILES IRON/NONALLOY STL, RIVETED/SIMILARLY CLOSED (NOT WELDED) | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.6.S: 7212600000 | 7212600000. FLAT-ROLLED IRON/NONALLOY STL, WDTH [LESS THAN]600MM, CLAD | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.8.S: 7220207060 | 7220207060. FLAT-ROLLED STAINLESS STL, WDTH [LESS THAN]300MM, NFW THAN COLD-RLD (COLD-REDUCED), THICKNESS [GREATER THAN]0.25MM BUT [LESS THAN]/= 1.25MM, [LESS THAN]/= 0.5% NICKEL [LESS THAN]15% CHROMIUM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.9.S: 7223005000 | 7223005000. FLAT WIRE OF STAINLESS STEEL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.10.S: 7220208000 | 7220208000. FLAT-ROLLED STAINLESS STL, WDTH [LESS THAN]300MM, NFW THAN COLD-RLD (COLD-REDUCED), THK [LESS THAN]/= 0.25MM, RAZOR BLADE STL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.11.S: 7217108060 | 7217108060. ROUND WIRE IRON/NONALLOY STL, NOT PLATED/COATED, [GREATER THAN]/= 0.6% CARBON, NOT HEAT-TREATED, OS DIAMETER [LESS THAN]1.0MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.12.S: 7226923060 | 7226923060. FLAT-ROLLED OTH ALLOY STL, WDTH [LESS THAN]300MM, NFW THAN COLD-RLD (COLD-REDUCED), TOOL STEEL OTH THAN HIGH-SPEED, OTHER THAN BALL-BEARING STEEL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.13.S: 7229905010 | 7229905016. ROUND WIRE OTHER ALLOY STL, OS DIAMETER [LESS THAN]1.0MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.15.S: 7304598060 | 7304598060. TUBES/PIPES/HLLW PRFLS OTH ALLOY STL, SMLESS, CIRC CS, OTHER THAN COLD-DRAWN/COLD-ROLLED (COLD-REDUCED), OS DIAMETER [GREATER THAN]285.8MM BUT [LESS THAN]406MM, WALL THK [LESS THAN]12.7MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.17.S: 7304246030 | 7304246030. TUBING (OIL/GAS DRILLING) STAINLESS STL, SEAMLESS, OS DIAMETER [LESS THAN]/= 114.3MM, WALL THK [GREATER THAN]9.5MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.18.S: 7229905031 | 7229905031. ROUND WIRE OTHER ALLOY STL, WITH OS DIAMETER [GREATER THAN]/= 1.0MM BUT [LESS THAN]1.5MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.19.S: 7304598010 | 7304598010. TUBES/PIPES/HOLLOW PROFILES OTH ALLOY STL, SEAMLESS, CIRC CS, OTHER THAN COLD-DRAWN/COLD-ROLLED (COLD-REDUCED), NOT HEAT-RESISTANT, OS DIAMETER [LESS THAN]38.1MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.20.S: 7219310010 | 7219310010. FLAT-ROLLED STAINLESS STL, WDTH [GREATER THAN]/= 600MM, NFW THAN COLD-RLD (COLD-REDUCED), THK [GREATER THAN]/= 4.75MM, COILS | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.21.S: 7304598045 | 7304598045. TUBES/PIPES/HLLW PRFLS OTH ALLOY STL, SMLESS, CIRC CS, OTHER THAN COLD-DRAWN/COLD-ROLLED (COLD-REDUCED), NOT HEAT-RESISTANT, OS DIAMETER [GREATER THAN]/= 190.5MM BUT [LESS THAN]/= 285.8MM, WALL THK [LESS THAN]12.7MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.22.S: 7306401090 | 7306401090. OTH TUBES/PIPES/HOLLOW PRFLS STAINLESS STL, WELDED, CIRC CS, WALL THK [LESS THAN]1.65MM, [LESS THAN]/= 0.5% NICKEL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.24.S: 7211296080 | 7211296080. FLAT-ROLLED IRON/NONALLOY STL, WIDTH [GREATER THAN]/= 300MM BUT [LESS THAN]600MM, NOT CLAD/PLATED/COATED, NFW THAN COLD-RLD (COLD-REDUCED), [GREATER THAN]/= 0.25% CRBN, THK [LESS THAN]/= 1.25MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.25.S: 7217201500 | 7217201500. FLAT WIRE IRON/NONALLOY STL, PLATED/COATED WITH ZINC | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.26.S: 7219120026 | 7219120026. FLAT-ROLLED STAINLESS STL, WDTH [GREATER THAN]1575MM, HOT-RLD, COILS, THK [GREATER THAN]6.8MM BUT [LESS THAN]10MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.28.S: 7304243010 | 7304243010. CASING (OIL/GAS DRILLING) STAINLESS STL, SEAMLESS, THREADED/COUPLED, OS DIAMETER [LESS THAN]215.9MM, WALL THK [LESS THAN]12.7MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.29.S: 7219220035 | 7219220035. FLAT-ROLLED STAINLESS STL, THICKNESS [GREATER THAN]/= 4.75MM BUT [LESS THAN]10MM, WIDTH [GREATER THAN]/= 600MM BUT [LESS THAN]1575MM, HOT-RLD, NOT COILS, THK 4.75-10MM, [GREATER THAN]0.5% NICKEL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.30.S: 7222403085 | 7222403085. SHAPES/SECTIONS STAINLESS STL, HOT-RLD, NOT DRILLED/PUNCHED/ADVANCED, MAX CROSS SECTION [LESS THAN]80MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.31.S: 7222403045 | 7222403045. SHAPES/SECTIONS STAINLESS STL, HOT-RLD, NOT DRILLED/PUNCHED/ADVANCED, MAX CS [GREATER THAN]/= 80MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.32.S: 7219110060 | 7219110060. FLAT-ROLLED STAINLESS STL, WDTH [GREATER THAN]1575MM, HOT-RLD, COILS, THK [GREATER THAN]10MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.36.S: 7219110030 | 7219110030. FLAT-ROLLED STAINLESS STL, WIDTH [GREATER THAN]/= 600MM BUT [LESS THAN]1575MM, HOT-RLD, COILS, THK [GREATER THAN]10MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.40.S: 7220206060 | 7220206060. FLAT-ROLLED STAINLESS STL, WDTH [LESS THAN]300MM, NFW THAN COLD-RLD (COLD-REDUCED), THK [GREATER THAN]1.25MM, [LESS THAN]/= 0.5% NICKEL, [LESS THAN]15% CHROMIUM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.41.S: 7217108025 | 7217108025. ROUND WIRE IRON/NONALLOY STL, NOT PLATED/COATED, [GREATER THAN]0.6% CARBON, HEAT-TREATED, OS DIAMETER [LESS THAN]1.0MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.42.S: 7220121000 | 7220121000. FLAT-ROLLED STAINLESS STL, WIDTH [GREATER THAN]/= 300MM BUT [LESS THAN]600MM, HOT-RLD, THK [LESS THAN]4.75MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.43.S: 7209900000 | 7209900000. FLAT-ROLLED IRON/NONALLOY STL, WDTH [GREATER THAN]/= 600MM, COLD-RLD, NOT CLAD/PLATED/COATED, WHETHER OR NOT IN COILS | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.44.S: 7213913020 | 7213913020. BARS/RODS IRON/NA STL, IRR COILS, HOT-RLD, CIRC CS, OS DIAMETER [LESS THAN]14MM, NOT TEMPRD/TREATD/PARTLY MFTD, WELDING QUALITY WIRE ROD | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.45.S: 7306617060 | 7306617060. OTH TUBES/PIPES/HOLLOW PROFILES OTH ALLOY STL (NOT STAINLESS), WELDED, SQ/RECT CS, WALL THK [LESS THAN]4MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.46.S: 7216330090 | 7216330090. H SECTIONS IRON/NONALLOY STL, HOT-RLD/DRWN/EXTRD, HEIGHT [GREATER THAN]/= 80MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.47.S: 7217905030 | 7217905030. WIRE IRON/NONALLOY STL, NOT PLATED/COATED WITH BASE METALS OR PLASTICS, [LESS THAN]0.25% CARBON | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.48.S: 7226923030 | 7226923030. FLAT-ROLLED OTH ALLOY STL, WDTH [LESS THAN]300MM, NFW THAN COLD-RLD (COLD-REDUCED), TOOL STEEL OTH THAN HIGH-SPEED, BALL-BEARING STL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.49.S: 7219120051 | 7219120051. FLAT-ROLLED STAINLESS STL, WIDTH [GREATER THAN]/= 1370MM BUT [LESS THAN]1575MM, HOT-RLD, COILS, THICKNESS [GREATER THAN]/= 4.75MM BUT [LESS THAN]6.8MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.50.S: 7227906020 | 7227906020. BARS/RODS OTHER ALLOY STL, IRR COILS, HOT-RLD, NOT TOOL STL, WELDING QUALITY WIRE RODS | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.51.S: 7217905090 | 7217905090. WIRE IRON/NONALLOY STL, NOT PLATED/COATED WITH BASE METALS OR PLASTICS, [GREATER THAN]/= 0.6% CARBON | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.57.S: 7304901000 | 7304901000. TUBES/PIPES/HOLLOW PROFILES IRON/NONALLOY STL, SEAMLESS, NONCIRCULAR CROSS SECTION, WALL THK [GREATER THAN]/= 4MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.58.S: 7304390002 | 7304390002. TUBES/PIPES/HLLW PRFLS IRON/NA STL, SMLESS, CIRC CS, OTHER THAN COLD-DRAWN/COLD-ROLLED (COLD-REDUCED), SUITABLE FOR BOILERS ETC, OS DIAMETER [LESS THAN]38.1MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.59.S: 7219120071 | 7219120071. FLAT-ROLLED STAINLESS STL, WDTH [GREATER THAN]600MM BUT [LESS THAN]1370MM, HOT-RLD, COILS, THICKNESS [GREATER THAN]/= 4.75MM BUT [LESS THAN]10MM, NOT HIGH-NICKEL ALLOY, [GREATER THAN]0.5% NICKEL, [LESS THAN]/= 1.5% OR [GREATER THAN]/= 5% MOLYBDENUM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.61.S: 7217905060 | 7217905060. WIRE IRON/NONALLOY STL, PLATED/COATED, [GREATER THAN]0.25% BUT [LESS THAN]0.6% CARBON | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.62.S: 7220125000 | 7220125000. FLAT-ROLLED STAINLESS STL, WDTH [LESS THAN]300MM, HOT-RLD, THK [LESS THAN]4.75MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.63.S: 7226928005 | 7226928005. FLAT-ROLLED OTH ALLOY STL, WDTH [LESS THAN]300MM, NFW THAN COLD-RLD (COLD-REDUCED), NOT TOOL STL, THK [GREATER THAN]0.25MM, HIGH-NICKEL ALLOY STL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.64.S: 7217106000 | 7217106000. OTHER WIRE IRON/NONALLOY STL, NOT PLATED/COATED, [LESS THAN]0.25% CARBON | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.65.S: 7219120021 | 7219120021. FLAT-ROLLED STAINLESS STL, WIDTH [GREATER THAN]/= 1370MM BUT [LESS THAN]/= 1575MM, HOT-RLD, COILS, THICKNESS [GREATER THAN]6.8MM BUT [LESS THAN]/= 10MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.66.S: 7304390016 | 7304390016. TUBES/PIPES/HOLLOW PROFILES IRON/NA STL, SEAMLESS, CIRC CS, OTHER THAN COLD-DRAWN/COLD-ROLLED (COLD-REDUCED), GALVANIZED, OS DIAMETER [LESS THAN]/= 114.3MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.67.S: 7304244040 | 7304244040. CASING (OIL/GAS DRILLING) STAINLESS STL, SEAMLESS, NOT THREADED/COUPLED, OS DIAMETER [GREATER THAN]/= 215.9MM BUT [LESS THAN]/= 285.8MM, WALL THK [GREATER THAN]/= 12.7MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.69.S: 7304413005 | 7304413005. TUBES/PIPES/HOLLOW PRFLS STAINLESS STL, SEAMLESS, CIRC CS, COLD-DRWN/RLD (COLD-REDUCED), OS DIAMETER [LESS THAN]19MM, HIGH-NICKEL ALLOY STL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.70.S: 7215500090 | 7215500090. OTHER BARS/RODS IRON/NONALLOY STL, COLD-FORMED/FINISHED, NOT COILS, [GREATER THAN]/= 0.6% CARBON | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.72.S: 7227200030 | 7227200030. BARS/RODS SILICO-MANGANESE STL, IRR COILS, HOT-RLD, WELDING QUALITY WIRE RODS, STAT NOTE 6 | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.73.S: 7306697060 | 7306697060. OTH TUBES/PIPES/HOLLOW PROFILES OTH ALLOY STL (NOT STAINLESS), WELDED, OTH NONCIRCULAR CS, WALL THK [LESS THAN]4MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.74.S: 7302101045 | 7302101045. RAILS IRON/NONALLOY STL, NEW, HEAT TREATED, [GREATER THAN]30KG/M | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.77.S: 7305316090 | 7305316090. OTHER TUBES/PIPES ALLOY STL, CIRC CS, OS DIAMETER [GREATER THAN]406.4MM, NOT LINE PIPE OR CASING (OIL/GAS), LONGITUDINALLY WELDED, NOT TAPERED PIPES/TUBES, NON-STAINLESS ALLOY STEEL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.79.S: 7226990110 | 7226990110. FLAT-ROLLED OTH ALLOY STL, WDTH [LESS THAN]600MM, ELECTROLYTICALLY PLATD/COATD W/ZINC, NOT GRAIN ORIENTED, NOT OF HIGH-SPEED STEEL, FURTHER WORKED THAN HOT-ROLLED OR COLD-ROLLED | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.80.S: 7225506000 | 7225506000. FLAT-ROLLED OTH ALLOY STL, WDTH [GREATER THAN]/= 600MM, COLD-RLD, THK [GREATER THAN]/= 4.75MM, NOT OF TOOL STEEL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.81.S: 7304905000 | 7304905000. TUBES/PIPES/HOLLOW PROFILES IRON/NONALLOY STL, SEAMLESS, NOT CIRCULAR CS, WALL THK [LESS THAN]4MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.82.S: 7219220005 | 7219220005. FLAT-ROLLED STAINLESS STL, WDTH [GREATER THAN]/= 600MM, HOT-RLD, NOT COILS, THICKNESS [GREATER THAN]/= 4.75MM BUT [LESS THAN]/= 4.75MM BUT [LESS THAN]/= 10MM, HIGH-NICKEL ALLOY STL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.83.S: 7217104045 | 7217104045. ROUND WIRE IRON/NONALLOY STL, NOT PLATED/COATED, [LESS THAN]0.25% CARBON, OS DIAMETER [LESS THAN]1.5MM, HEAT-TREATED, IN COILS WEIGHING [GREATER THAN]2 KG | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.84.S: 7209270000 | 7209270000. FLAT-ROLLED IRON/NONALLOY STL, WDTH [GREATER THAN]/= 600MM, COLD-RLD, NOT CLAD/PLATED/COATED, NOT COILS, THK 0.5-1MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.85.S: 7219900060 | 7219900060. OTHER FLAT-ROLLED STAINLESS STL, WDTH [GREATER THAN]/= 600MM, FURTHER WORKED THAN COLD-RLD, [LESS THAN]/= 0.5% NICKEL, [LESS THAN]15% CHROMIUM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.86.S: 7219120081 | 7219120081. FLAT-ROLLED STAINLESS STL, WIDTH [GREATER THAN]/= 600MM BUT [LESS THAN]1370MM, HOT-RLD, COILS, NOT HIGH-NICKEL ALLOY, THICKNESS [GREATER THAN]/= 4.75MM BUT | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.88.S: 72241000005 | 7224100005. INGOTS AND OTHER PRIMARY FORMS OF HIGH-NICKEL ALLOY STEEL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.89.S: 7213200080 | 7213200080. BARS/RODS IRON/NONALLOY STL, HOT-RLD, IRR COILS, FREE-CUTTING STL, [LESS THAN]0.1% LEAD | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.90.S: 7216100010 | 7216100010. U SECTIONS IRON/NONALLOY STL, HOT-ROLLED/DRAWN/EXTRUDED, HEIGHT [LESS THAN]80MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.91.S: 7306695000 | 7306695000. OTH TUBES/PIPES/HOLLOW PROFILES IRON/NONALLOY STL, WELDED, OTH NONCIRCULAR CS, WALL THK [LESS THAN]4MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.93.S: 7208380015 | 7208380015. FLAT-ROLLED IRON/NA STL, WDTH [GREATER THAN]/= 600MM, HOT-RLD, NOT CLAD/PLATED/COATED, COILS, THICKNESS [GREATER THAN]/= 3MM BUT [LESS THAN]4.75MM, HIGH-STRENGTH STL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.94.S: 7217104090 | 7217104090. ROUND WIRE IRON/NONALLOY STL, NOT PLATED/COATED, [LESS THAN]0.25% CARBON, OS DIAMETER [LESS THAN]1.5MM, NOT HEAT-TREATED | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.95.S: 7302105020 | 7302105020. RAILS OF ALLOY STEEL, NEW | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.96.S: 7210706030 | 7210706030. FLAT-ROLLED IRON/NA STL, WDTH [GREATER THAN]/= 600MM, PAINTD/VARNSHD/COATD W/PLASTICS, ELECTROLYTICALLY PLATD/COATD W/ZINC | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.97.S: 7304244060 | 7304244060. CASING (OIL/GAS DRILLING) STAINLESS STL, SEAMLESS, NOT THREADED/COUPLED, OS DIAMETER [GREATER THAN]285.8MM BUT /=12.7MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.99.S: 7304243040 | 7304243040. CASING (OIL/GAS DRILLING) STAINLESS STL, SEAMLESS, THREADED/COUPLED, OS DIAMETER [GREATER THAN]/= 215.9MM BUT /=12.7MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.100.S: 7304243020 | 7304243020. CASING (OIL/GAS DRILLING) STAINLESS STL, SEAMLESS, THREADED/COUPLED, OS DIAMETER [LESS THAN]215.9MM, WALL THK [GREATER THAN]/= 12.7MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.101.S: 7219130081 | 7219130081. FLAT-ROLLED STAINLESS STL, WIDTH [GREATER THAN]/= 600MM BUT [LESS THAN]1370MM, NFW THAN HOT-RLD, COILS, ANNEALED OR PICKLED, THICKNESS [GREATER THAN]/= 3MM BUT [LESS THAN]4.75MM, [LESS THAN]0.5% OR [GREATER THAN]24% NICKEL | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.102.S: 7211140090 | 7211140090. FLAT-ROLLED IRON/NONALLOY STL, WDTH [LESS THAN]600MM, NOT CLAD/PLATED/COATED, NFW THAN HOT-RLD, NOT UNIVERSAL MILL PLATE, THK [GREATER THAN]/= 4.75MM, NOT HIGH-STRENGTH STEEL, COILS | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.103.S: 7218910030 | 7218910030. SEMIFINISHED STAINLESS STL, RECTANGULAR CROSS SECTION, WDTH [LESS THAN]4X THK, CS AREA [GREATER THAN]/= 232 CM2 | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.104.S: 7306213000 | 7306213000. CASING (OIL/GAS DRILLING) STAINLESS STL, WELDED, THREADED/COUPLED | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.105.S: 7211234500 | 7211234500. FLAT-ROLLED IRON/NONALLOY STL, WDTH [LESS THAN]300MM, NOT CLAD/PLATED/COATED, NFW THAN COLD-RLD (COLD-REDUCED), [LESS THAN]0.25% CRBN, THK [LESS THAN]/= 0.25MM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.106.S: 7220206080 | 7220206080. FLAT-ROLLED STAINLESS STL, WDTH [LESS THAN]300MM, NFW THAN COLD-RLD (COLD-REDUCED), THK [GREATER THAN]1.25MM, NOT HIGH-NICKEL ALLOY, [LESS THAN]/= 0.5% NICKEL, [GREATER THAN]/= 15% CHROMIUM | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.107.S: 7305391000 | 7305391000. OTHER TUBES/PIPES IRON/NONALLOY STL, CIRC CS, OS DIAMETER [GREATER THAN]406.4MM, WELDED, OTHER THAN LONGITUDALLY WELDED | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. | |
| GAE.108.S: 7217204550 | 7217204550. ROUND WIRE IRON/NONALLOY STL, PLATED/COATED WITH ZINC, OS DIAMETER [GREATER THAN]/= 1.0MM BUT [LESS THAN]1.5MM, [GREATER THAN]/= 0.25% BUT [LESS THAN]0.6% CARBON | 85 FR 81079, 12/14/2020. 86 FR 70009, 12/9/2021. |
15 C.F.R. § 705 app Supplement No. 2 to Part 705
Harmonized Tariff Schedule of the United States (HTSUS) Classifications are identified by the U.S. International Trade Commission (ITC) through its web version of the Harmonized Tariff Schedule. The list of the HTSUS Classifications referenced in this table of GAEs is drawn from the HTSUS and ITC Change Records for HTSUS Classifications (compiled at https://hts.usitc.gov/) and will be amended when the ITC publishes subsequent Change Records. If there are any discrepancies between the list of the HTSUS Classifications in this table and the HTSUS Classifications identified by the ITC in the Harmonized Tariff Schedule of the United States and the associated Change Records, the ITC's list of HTSUS Classifications shall be controlling. Therefore, if an HTSUS Classification defining a GAE is split or otherwise modified by the ITC in the HTSUS, GAEs are extended to the newly-created HTSUS Classification(s), so long as the new 'child' HTSUS Classification(s) contain products falling entirely within the scope of the old 'parent' HTSUS classification. These types of 'inherited' GAEs are effective from the effective date of the change to the HTSUS, even prior to a Commerce rule being published to add the new HTSUS number to the GAE list under supplement no. 2. During the period after the effective date of the change to the HTSUS and before the GAE is updated, ACE will reject entries claiming the exclusion with the new HTSUS number and importers will have to make entry without the exclusion. In order for importers to preserve their rights, if any, to the exclusion with the new HTSUS number during this period, importers are advised to seek extensions of liquidation of the affected entries with CBP until Commerce is able to update and publish a revised GAE list under this supplement no. 2.