Section 4496.6 - Additional Requirements(a) There shall be visible to the sealer and/or to the operator (driver), contact information of the responsible party in case the unattended weighing system fails to operate properly (e.g., failures of hardware, software, printer, etc.)(b) The weighmaster is responsible for ensuring that the unattended weighing system is capable of voiding an incorrect weighmaster certificate and then issuing a corrected certificate. This requirement shall be verified as part of the unattended weighing system's type evaluation required by Business and Professions Code 12500.5.(c) If the operator (driver) makes an error entering any information that is necessary for the transaction, e.g., tare, causing an incorrect certificate to be generated, the operator (driver) must make corrections upon recognition of the error. It is unlawful for a driver to manipulate a tare so as to facilitate fraud.(d) Also see Chapter 1, Sections 4000, 4001, and 4002 for applicable selection, installation, use, and maintenance requirements.Cal. Code Regs. Tit. 4, § 4496.6
1. New section filed 6-9-2014; operative 10-1-2014 (Register 2014, No. 24). Note: Authority cited: Sections 12027 and 12735, Business and Professions Code. Reference: Sections 12716.5, 12719 and 12737, Business and Professions Code.
1. New section filed 6-9-2014; operative 10/1/2014 (Register 2014, No. 24).