Statutes, codes, and regulations
California Code Of Regulations
Title 25 - Housing and Community DevelopmentDivision 1 - Housing and Community DevelopmentChapter 3 - Factory-Built Housing, Mobilehomes, and Manufactured HomesSubchapter 2 - Manufactured Homes, Mobilehomes, Multifamily Manufactured Homes, Commercial Modulars, and Special Purpose Commercial ModularsArticle 3 - Commercial Modulars
Subarticle 5 - Plumbing
Section 4522.5 - Oil Piping - Tubing Joints

Cal. Code Regs. tit. 25 § 4522.5

Download
PDF
Current through Register 2024 Notice Reg. No. 39, September 27, 2024
Section 4522.5 - Oil Piping - Tubing Joints

Tubing joints shall be made with either a single or a double flare of the proper degree, as recommended by the tubing manufacturer, or with other listed vibration-resistant fittings, or joints may be brazed with material having a melting point exceeding 1,000 degrees Fahrenheit (537.8 degrees Celsius). Metallic ball sleeve compression-type tubing fittings shall not be used.

Cal. Code Regs. Tit. 25, § 4522.5

1. New section filed 9-19-2011; operative 10-19-2011 (Register 2011, No. 38).

Note: Authority cited: Section 18015, Health and Safety Code. Reference: Section 18025, Health and Safety Code.

1. New section filed 9-19-2011; operative 10-19-2011 (Register 2011, No. 38).