Section 4041.5 - Permit-Posting, Revocation and Stop Work Orders(a) Once the application for an alteration or conversion is approved and a permit is issued, the permit shall be posted in a conspicuous location on the manufactured home, multifamily manufactured home, commercial modular or special purpose commercial modular.(b) The issuance or granting of a permit or approval of plans and specifications shall not be construed to be a permit for, or an approval of, any violation of the Health and Safety Code or any of the provisions of this chapter. Whenever an issued permit, or the work that it authorizes, violates provisions contained in this chapter, the Health and Safety Code, or any other provisions of applicable law, the permit, or that portion of the permit that authorizes the work in violation, shall be deemed by the department to be null and void.(c) The issuance of a permit based upon plans and specifications shall not prevent the department from thereafter requiring the correction of errors in these plans and specifications, nor shall the issuance of a permit preclude the department's power to prevent occupancy of a manufactured home, multifamily manufactured home, commercial modular or special purpose commercial modular, when it is found to be in violation of this chapter.(d) Whenever any work is performed in violation of the provisions of this chapter, the Health and Safety Code, or any other applicable provisions of law, the department shall post an order to stop work on the site and provide a written notice to the person responsible for the work being performed. The work shall immediately stop until authorized to proceed by the department.Cal. Code Regs. Tit. 25, § 4041.5
1. New section filed 2-19-2013; operative 4-1-2013 (Register 2013, No. 8). Note: Authority cited: Sections 18015, 18025, 18028 and 18029, Health and Safety Code. Reference: Sections 18025, 18028, 18029 and 18029.3, Health and Safety Code.
1. New section filed 2-19-2013; operative 4-1-2013 (Register 2013, No. 8).