Section 4025 - In-Plant Quality Control(a) The manufacturer shall submit a manual, or shall reference an applicable manual previously approved by the department, outlining a program of quality control concurrent with his request for plan approval. The program outlined must meet the standards of and be approved by the department. In addition, the manufacturer shall designate a company or corporate officer or other responsible person to be responsible for the quality control program and shall maintain records to substantiate that each unit has been inspected and complies with the plans as approved by the department.(b) Specific Requirements for Manual for Mobilehomes and Commercial Coaches:(1) Scope and purpose of manual.(2) Receiving inspection procedure for basic materials.(3) Material storage and stock rotation procedure.(4) Drawings and bills of material.(5) Types and frequency of product inspection.(6) Sample of inspectional control form used.(7) Record-keeping procedures for quality control forms.(8) List of major pieces of production equipment.(9) Responsibility for quality control program.(10) Test procedural manual, including electrical, gas line, water systems and drain/vent/plumbing fixture tests and type of test equipment used.(11) List of test equipment.(c) The manufacturer shall provide a control card or other approved documents with each vehicle on the assembly line. The card or other approved documents shall identify the structural, electrical, mechanical and plumbing system in the vehicle and the vehicle identification number (VIN).(d) The department shall make inspections of both vehicles under construction and of completed vehicles. The issuance of insignia shall be conditioned to compliance with the regulations as indicated by these inspections.(e) Where either vehicles under construction or completed vehicles are found to be in violation during inspection and such violations are not corrected at the time of inspection, the department shall serve upon the manufacturer a Notice of Violations as prescribed in Section 4013. A reinspection shall be requested by a manufacturer served with Notice of Violations pursuant to Sections 4010 and 4011.(f) The quality control manual and procedure requirements of Title VI (24 C.F.R.) are applicable to mobile homes manufactured after June 15, 1976. (See Federal Mobile Home Procedural and Enforcement Regulations, Title VI, 24 C.F.R., Part 3282 .)Cal. Code Regs. Tit. 25, § 4025
1. Amendment filed 5-4-79; effective thirtieth day thereafter (Register 79, No. 18). For prior history, see Registers 73, No. 36, 75, No. 30, 76, No. 25, and 76, No. 31.
2. Change without regulatory effect amending subsection (b) and NOTE filed 10-8-2008 pursuant to section 100, title 1, California Code of Regulations (Register 2008, No. 41). Note: Authority cited: Section 18015, Health and Safety Code. Reference: Sections 18025, 18025.5 and 18028, Health and Safety Code.
1. Amendment filed 5-4-79; effective thirtieth day thereafter (Register 79, No. 18). For prior history, see Registers 73, No. 36, 75, No. 30, 76, No. 25, and 76, No. 31.
2. Change without regulatory effect amending subsection (b) and Note filed 10-8-2008 pursuant to section 100, title 1, California Code of Regulations (Register 2008, No. 41).