Section 3032 - Required InspectionsThe inspection agency as applicable shall make at least the following inspections:
(a) For at least the first ten units of each model, produced at each manufacturing location, all systems including structural, electrical, mechanical and plumbing shall be inspected.(b) Following inspection and approval of the first ten units, each system shall be inspected in at least 25 percent of all units produced thereafter, except the inspection level may be reduced to 10 percent for building components or building systems. The manufacturer shall request written approval from the department before reducing the level of inspection from the initial 100 percent inspection.(c) The manufacturer may request written approval from the department to further reduce the frequency of inspection for building components, when it can be shown that the nature of the product, its end use, or the manufacturing process warrants a lesser inspection frequency.Cal. Code Regs. Tit. 25, § 3032
Note: Authority cited: Sections 17003.5 and 19990, Health and Safety Code. Reference: Sections 19990, 19991.1 and 19991.2, Health and Safety Code.