Cal. Code Regs. tit. 25 § 3010
The following definitions and those contained in Division 13, Part 6 commencing with Section 19960, Health and Safety Code apply to the provisions of this subchapter.
"Agency, Design Approval" means, in addition to the definition contained in Section 19969.3, Health and Safety Code, a private entity which, as determined pursuant to Sections 3022.1 and 3022.2 is:
"Agency, Listing" means an agency approved by the department which is in the business of listing or labeling and which maintain a periodic inspection program on current production of listed models, and which makes available at least an annual published report of such listing in which specific information is included that the product has been tested to approved standards and found safe for use in a specified manner.
"Agency, Quality Assurance" means an organization which:
"Agency, Testing" means an organization which is:
"Field Technical Service" means interpretation and clarification by the department or design approval agency of technical data relating to the application of this subchapter, but not including inspection.
"In Substantial Part Manufactured" means a module or major portion of factory-built housing assembled at an offsite location, in such a manner that all portions may not be inspected at the installation site without disassembly or destruction of the part.
"Insignia of Approval" means a tab or tag issued by the department to indicate compliance with this subchapter.
"Labeled" means equipment bearing an inspection label of an approved testing or listing agency.
"Listed" means all equipment and installations that appear in a list published by an approved testing or listing agency.
"Local Inspection Agency" means a local government building department authorized and approved pursuant to Sections 3036 and 3037.
"Manufacturer" means any person who produces factory-built housing.
"Model" means a specific design of factory-built housing, as designated by the manufacturer, identifiable as such for purposes of plan checking, quality control, quality assurance, in-plant and on-site inspection.
"Modified" means any change from the approved plans or installation instructions which in the opinion of the department, design approval agency or local enforcement agency would affect the structural, mechanical, electrical or plumbing systems of factory-built housing bearing a department insignia of approval.
"Professional Engineer" means an engineer holding a valid certificate under Chapter 7 (commencing with Section 6700) of Division 3, of the Business and Professions Code, in that branch of engineering which is applicable.
"System" is a combination of structural, plumbing, mechanical or electrical elements, components or subassemblies.
Cal. Code Regs. Tit. 25, § 3010
Note: Authority cited: Sections 17003.5, 19969.3, 19990 and 19991.3, Health and Safety Code. Reference: Sections 19969.3, 19990 and 19991.3, Health and Safety Code.